PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 5965
Holder Assy, Standard, Gray

Universal Holder

• Holder Assy, Standard, Gray
• Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Adjustable tilt angle
• Durable plastic holder and machined aluminum-mount
• For 1/2" bar-mounting
• Used with vacuum valves with tip extension

PN 4561
Holder, Auto HP, Molded, Normally Closed, White

Asepsis Holders

• Holder, Auto HP, Molded, Normally Closed, White
• Normally Closed
• Air operated actuator control.
• Resists chemical discoloration.
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5960
Holder, Auto HP, w/Lockout Toggle, Gray

Universal Holders

• Holder, Auto HP, w/Lockout Toggle, Gray
• With Lockout Toggle
• Easy clean sytle
• Air operated actuator control
• Normally closed
• Durable plastic holder aqnd machined aluminum-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 4592
Holder, Auto HP, w/o Lockout Toggle, Gray

Universal Holders

• Holder, Auto HP,  w/o Lockout Toggle, Gray
• Without Lockout Toggle
• Easy clean style
• Air operated actuator control
• Normally closed
• Durable plastic holder and machined alumimun-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 5983
Holder Valve, Auto HP, Normally Closed, Rear Port

Rear Port Micro Valve, Normally Closed

• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5947
Holder Valve, Auto HP, Normally Open, Side Port

Holder Valve, Auto HP, Normally Open, Side Port

• Normally open is used for positive air signal
• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 4869
Holder, Auto HP, Molded, Normally Closed, Gray

Asepsis Holder, Gray, Normally Closed

• Lt. Gray, Normally Closed
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 4566
Holder, Standard, Molded, White

Asepsis Holders

• Holder, Standard, Molded, White
• Asepsis Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5970
Holder Assy, Vacuum, Gray

Universal Holder

• Holder Assy, Vacuum, Gray
• HVE Holder
• Holds vacuum valves from base
• For 1/2" bar-mounting

• Adjustable tilt angle

PN 5962
Holder Replacement, Standard, Gray

Replacement Holder

• Standard Holder
• Replacement holders for bracket assemblies

PN 5987
Holder, Auto HP, Molded, Normally Closed, LT Sand

Asepsis Holders

• Holder, Auto HP, Molded, Normally Closed, LT Sand
• Normally Closed
• Air operated actuator control.
• Resists chemical discoloration.
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5989
Holder Valve, Auto HP, Normally Open, Rear Port

Holder Valve, Auto HP, Normally Open, Rear Port

• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 5997
Stem w/O-Rings for Auto HP Holder Valve, Normally Closed

Stem w/O-Rings for Auto HP Holder Valve, Normally Closed

PN 5988
Holder, Standard, Molded, LT Sand

Asepsis Holders

• Holder, Standard, Molded, LT Sand
• Asepsis Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5940
Holder, Auto HP, w/Lockout Toggle, Black

Universal Holders

• Holder, Auto HP, w/Lockout Toggle, Black
• With Lockout Toggle
• Easy clean style
• Air operated actuator control
• Normally closed
• Durable plastic holder and machined aluminum-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 5945
Holder Assy, Standard, Black

Universal Holder

• Holder Assy, Standard, Black
• Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Adjustable tilt angle
• For 1/2" bar-mounting
• Used with vacuum valves with tip extension

PN 5931
Holder Bracket, Single, Black

Holder Bracket

• Single, Black
• For use with 5900 through 5925 holders
• Durable plastic
• Mounting hardware Included

PN 5905
Holder, Standard, Black

Economy Holders

• Mounts on holder brackets 5929-5935
• Includes 10-32 mounting screw
• For HP, SE, HVE with Tip

PN 4568
Holder, Standard, Molded, Gray

Standard Asepsis Holder, Gray

• Holder, Standard, Molded, Gray
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle
• Air operated actuator control

PN 9675
Compression Spring, .094 Diameter x .218 Long

Compression Spring, .094 Diameter x .218 Long

PN 5881
Holder Bar, 2", Gray

Holder Bar

• Holder Bar, Single 2"
• For use with 4592 and 5940 through 5970 holders
• Mounting hardware

PN 5961
Holder Replacement, Auto HP , Gray

Replacement Holders

• Automatic HP Holder
• Replacement holders for bracket assemblies
• Durable plastic construction

PN 5884
Holder Bar, 8", Gray

Holder Bar

• Holder Bar, Quad 8"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 52161G
Assy, 4-Way Holder, Series 5, Light Gray

Assistant’s Holders for DCI Edge Light Gray4-Position Holder, Series 5

PN 4576
Holder, L/R, Auto HP, Molded, Normally Closed, White w/Sterling Tubing

Asepsis Holders

• Holder, L/R, Auto HP, Molded, Normally Closed, White w/Sterling Tubing
• Automatic Handpiece Holders
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5910
Holder, Standard, Gray

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For HP, SE, HVE with Tip

PN 8331
Holder Bar, Swing Mount, 4 Position

Swing Mount Holder Bar

• 4-Position Holder
• Mounts to vertical or horizontal surface
• White powder coat finish
• 3- or 4-position holder for syringe & vacuum valves held by tip

PN 5903
Holder, Vacuum, Black

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For HVE's

PN 5929
Holder Bracket, Single, Gray

Holder Bracket

• Single Gray Plastic

• For use with 5900 through 5925 holders
• Durable plastic
• Mounting hardware Included

PN 4564
Holder, Auto HP, Molded, Normally Open, White

Asepsis Holders

• Holder, Auto HP, Molded, Normally Open, White
• Normally Open
• Air operated actuator control.
• Resists chemical discoloration.
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5912
Cavitron HP Sleeve Assy

Cavitron HP Sleeve Assy

• Adapts handpiece assembly to fit standard holders
• Molded plastic with set screw

PN 5880
Holder Bar, 10", Gray

Holder Bars

• Holder Bar, 10",  Gray
• For use w/ 4592 & 5940 through 5970 holders
• Mounting Hardware Included

PN 5918
Holder, Syringe, Gray

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For Syringes

PN 5923
Holder, Vacuum, Gray

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For HVE's

PN 4578
Holder, Auto HP, Molded, Normally Closed, 4% Gray

Asepsis Holders

• Holder, Auto HP, Molded, Normally Closed, 4% Gray
• Automatic Handpiece Holders
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5882
Holder Bar, 4", Gray

Holder Bars

• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 5900
Holder, Standard, White

Economy Holders

• Mounts on holder brackets #5929-#5935
• Includes 10-32 mounting screw
• For HP, SE, HVE with Tip

PN 5969
Holder, Electric Auto, Normally Closed, Gray

Electric Holders

• Normally Closed
• Holder assembly with low voltage switch for direct activation of electrical accessory
• On/off lockout toggle
• 125 Volts AC / DC 5 amps
• Automatic holder

PN 5954
Holder Bar, 8", Black

Holder Bar

• Holder Bar, Quad 8"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Black holder bars are anodized

PN 4586
Holder, Syringe, Aseptic Clip-on, Gray

Asepsis Clip-on Holders

• Holder, Syringe (SE or Extended HVE by the tip)
• HP holder has air operated actuator

PN 5915
Holder, Syringe, White

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For Syringes

PN 8335
Holder, 4-Position, Holds 2 HVE's by Base

Assistant’s Holders

• Holder, 4-Position, Holds 2 HVE's by Base
• Holds 2 HVE's by Base
• Mounts on 1/2" O.D. pin
• Mounting screw included
• 4-position holder for syringe and vacuum valves

PN 4580
Holder, Assy, Handpiece, Aseptic Clip-on,White

Asepsis Clip-on Holders

• Holder, Assy, Handpiece, Normally Closed
• HP holder has air operated actuator

PN 5883
Holder Bar, 6", Gray

Holder Bars

• Holder Bar, Triple 6"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 5951
Holder Bar, 2", Black

Holder Bars

• Holder Bar, Single 2"
• For use with 4592 and 5940 through 5970 holders
• Mounting hardware
• Black holder bars are anodized

PN 5998
Stem w/O-Rings for Auto HP Holder Valve, Normally Open

Stem w/O-Rings for Auto HP Holder Valve, Normally Open

PN 4445
Holder Bar, Under Counter Swing Mount, White

Under Counter Holder Bar

• Cabinet-Mount Holder Bar
• For use with molded asepsis holders
• White powder coat
• Bar is 10-1/2" x 3-1/2"

PN 5930
Holder Bracket, Single, White

Holder Bracket

• Single, White
• For use with 5900 through 5925 holders
• Durable plastic
• Mounting hardware Included

PN 5950
Vacuum Holder Assy, Vacuum, Black

Universal Holder

• Vacuum Holder Assy, Vacuum, Black
• HVE Holder
• Holds vacuum valves from base
• For 1/2" bar-mounting
• Adjustable tilt angle

PN 4868
Holder, Auto HP, Molded, Normally Open, Gray

Asepsis Holders

• Holder, Auto HP, Molded, Normally Open, Gray
• Automatic Handpiece Holders
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 4563
Holder, Electric Auto, Molded, Normally Closed, White

Electric Holders

• Normally Closed
• On/off lockout toggle, 5966-5969
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• Automatic Holder

PN 5925
Holder, Vacuum, White

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For HVE's

PN 4585
Holder, Syringe, Aseptic Clip-on, White

Asepsis Clip-on Holders

• Holder, Syringe (SE or Extended HVE by the tip)
• HP holder has air operated actuator

PN 8364
Holder, 4-Position, Holds SE & HVE by Tip

Assistant’s Holders

• Holder, 4-Position, Holds SE & HVE by Tip
• Holds 2 HVE's by Tip
• Mounts on 1/2" O.D. pin
• Mounting screw included
• 4-position holder for syringe and vacuum valves

PN 8343
Holder Bar, Swing Mount, 3 Position

Swing Mount Holder Bar

• 3-Position Holder
• Mounts to vertical or horizontal surface
• 3- or 4-position holder for syringe & vacuum valves held by tip

PN 5963
Holder Replacement, Vacuum, Gray

Replacement Holder

• Vacuum Holder
• Replacement holders for bracket assemblies

PN 9833
Screw, Socket Cap Set, 10-32 x 1/2 Steel

Screw, Socket Cap Set, 10-32 x 1/2 Steel

PN 4579
Holder, Standard, Molded, 4% Gray

Asepsis Holders

• Holder, Standard, Molded, 4% Gray
• Automatic Handpiece Holders
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5914
Holder, Auto HP, Molded, Normally Open, White w/Sterling Tubing

Asepsis Holders

• Holder, Auto HP, Molded, Normally Open, White w/Sterling Tubing
• Automatic Handpiece Holders
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5967
Holder, Electric Auto, Normally Open, Gray

Electric Holders

• Normally Open
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• On/off lockout toggle, 5966-5969
• Automatic holder

PN 9797
Screw, Plastite Phillips Pan Head, 4 x 3/8 Zinc

Screw, Plastite Phillips Pan Head, 4 x 3/8 Zinc

PN 4582
Holder, Vacuum, Aseptic Clip-on White

Asepsis Clip-on Holders

• Holder, Vacuum, HVE (by the base)
• HP holder has air operated actuator

PN 5920
Holder, Syringe, Black

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For Syringes

PN 8241
Horseshoe Holder Bar w/Standard Holders, White

Horseshoe Assistant’s Holder Bar

• Bar and holders
• Includes three holders
• 1/2" O.D. pin

PN 5885
Holder Bar, 14", Gray

Holder Bar

• Holder Bar, 14"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 4581
Holder, Assy, Handpiece, Aseptic Clip-on, Gray

Asepsis Clip-on Holders

• Holder, Assy, Handpiece, Normally Closed
• HP holder has air operated actuator

PN 8633
Holder Bar, 4 Position, Holds SE & HVE by Base

Assistant’s Holder Bars for Telescoping Arm

• Holder Bar, 4 Position, Holds SE & HVE by Base
• Holds SE and HVE by Base
• Mounts on end of 1/2" O.D. bar
• Holder for syringe and vacuum valves

PN 8332
Holder Bar, 4 Position, Holds SE & HVE by Tip

Assistant’s Holder Bars for Telescoping Arm

• Holder Bar, 4 Position, Holds SE & HVE by Tip
• Holds SE and HVE by Tip
• Mounts on end of 1/2" O.D. bar
• Holder for syringe and vacuum valves

PN 5942
Holder Replacement, Standard, Black

Replacement Holders

• Standard holder
• Replacement holders for bracket assemblies
• Durable plastic construction

PN 4583
Holder, Vacuum, Aseptic Clip-on, Gray

Asepsis Clip-on Holders

• Holder, Vacuum, HVE (by the base)
• HP holder has air operated actuator

PN 5932
Holder Bracket, 2-Position, Aluminum

Holder Bracket

• 2-Position, Aluminum
• For use with 5900 through 5925 holders
• Durable precision milled aluminum
• Mounting hardware Included

PN 5976
Holder, Electric Auto, Vacuum, Normally Closed, Gray

Electric Auto Holders

• HVE Normally Closed
• Holder assembly with low voltage switch for direct activation of electrical accessory
• On/off lockout toggle
• 125 Volts AC / DC 5 amps
• Automatic holder

PN 5933
Holder Bracket, 3-Position, Aluminum

Holder Bracket

• 3-Position, Aluminum
• For use with 5900 through 5925 holders
• Durable precision milled aluminum
• Mounting hardware Included

PN 8333
Holder, 3-Position, Holds SE & HVE by Base

Assistant’s Holders

• Holder, 3-Position, Holds SE & HVE by Base
• Holds HVE by Base
• Mounts on 1/2" O.D. pin
• Mounting screw included
• 3-position holder for syringe and vacuum valves

PN 5943
Holder Replacement, Vacuum, Black

Replacement Holders

• Vacuum Holder
• Replacement holders for bracket assemblies

PN 5953
Holder Bar, 6", Black

Holder Bar

• Holder Bar, Triple 6"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Black holder bars are anodized

PN 4444
Holder Bar, Under Counter Swing Mount, Gray

Under Counter Holder Bar

• Cabinet-Mount Holder Bar
• For use with molded asepsis holders
• Gray powder coat
• Bar is 10-1/2" x 3-1/2"

PN 4562
Holder, Electric Auto, Molded, Normally Open, White

Electric Holders

• Normally Open
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• On/off lockout toggle, 5966-5969
• Automatic holder

PN 7101
Electric Switch, Normally Open

Electric Switch, Normally Open

PN 5972
Actuator Lever for 5960, Gray

Actuator Lever for 5960, Gray

PN 5952
Holder Bar, 4", Black

Holder Bars

• Holder Bar, Dual 4"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Black holder bars are anodized

PN 8632
Holder Bar, 3 Position, Holds SE & HVE by Base

Assistant’s Holder Bars for Telescoping Arm

• Holder Bar, 3 Position, Holds SE & HVE by Base
• Holds SE and HVE by Base
• Mounts on end of 1/2" O.D. bar
• Holder for syringe and vacuum valves

PN 5926
Holder Bar, 10", Black

Holder Bar

• Holder Bar, 10", Black
• For use w/ 4592 & 5940 through 5970 holders
• Mounting Hardware Included

PN 8237
Telescoping Arm w/4 Position Holder, Anodized

Telescoping Breakaway Arm Systems

• Telescoping Arm w/4 Position Holder, Anodized
• 24" to 46 3/4" horizontal reach
• 7 1/2" rigid arm
• Designed for mounting assistant's accessories
• Includes post-mount
• Use with 2" post-mount or wall-mount
• Breakaway feature protects equipment

PN 5934
Holder Bracket, 4-Position, Aluminum

Holder Bracket

• 4-Position, Aluminum
• For use with 5900 through 5925 holders
• Durable precision milled aluminum
• Mounting hardware Included

PN 8334
Holder, 3-Position, Holds SE & HVE by Tip

Assistant’s Holders

• Holder, 3-Position, Holds SE & HVE by Tip
• Holds HVE by Tip
• Mounts on 1/2" O.D. pin
• Mounting screw included
• 3-position holder for syringe and vacuum valves

PN 5941
Holder Replacement, Auto HP , Black

Replacement Holders

• Automatic HP Holder
• Replacement holders for bracket assemblies

PN 8402
Horseshoe Holder Bar w/Standard Holders, Gray

Horseshoe Assistant’s Holder Bar

• Bar and holders
• Includes three holders
• 1/2" O.D. pin
• Gray powder coat 

PN 5955
Holder Bar, 14", Black

Holder Bar,

• Holder Bar, 14"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Black holder bars are anodized

PN 52161W
Assy, 4-Way Holder, Series 5, White

Assistant’s Holders for DCI Edge

• 4-Position Holder, Series 5

PN 8242
Holder Bar, 3 Position, Holds SE & HVE by Tip

Assistant’s Holder Bars for Telescoping Arm

• Holder Bar, 3 Position, Holds SE & HVE by Tip
• Holds SE and HVE by Tip
• Mounts on end of 1/2" O.D. bar
• Holder for syringe and vacuum valves

PN 5968
Holder, Electric Auto, Normally Closed, Black

Electric Holders

• Normally Closed
• Holder assembly with low voltage switch for direct activation of electrical accessory
• On/off lockout toggle
• 125 Volts AC / DC 5 amps
• Automatic holder

PN 5966
Holder, Electric Auto, Normally Open, Black

Electric Holders

• Normally Open
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• On/off lockout toggle, 5966-5969
• Automatic holder