PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 5965
Holder Assy, Standard, Gray

Universal Holder

• Holder Assy, Standard, Gray
• Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Adjustable tilt angle
• Durable plastic holder and machined aluminum-mount
• For 1/2" bar-mounting
• Used with vacuum valves with tip extension

PN 4561
Holder, Auto HP, Molded, Normally Closed, White

Asepsis Holders

• Holder, Auto HP, Molded, Normally Closed, White
• Normally Closed
• Air operated actuator control.
• Resists chemical discoloration.
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 2972
Caster, Soft Wheel for Hard Floors, Gray, Pkg of 5

Cart & Stool Casters

• Soft wheel for hard floor caster, Gray, (pkg of 5)

PN 5960
Holder, Auto HP, w/Lockout Toggle, Gray

Universal Holders

• Holder, Auto HP, w/Lockout Toggle, Gray
• With Lockout Toggle
• Easy clean sytle
• Air operated actuator control
• Normally closed
• Durable plastic holder aqnd machined aluminum-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 8013
Tray, Stainless Steel, 9-3/4" x 13-1/2"

Stainless Steel Tray (B Size)

• Stainless Steel Tray (B Size)
• 9 3/4 X 13 1/2" (B Size)

PN 4592
Holder, Auto HP, w/o Lockout Toggle, Gray

Universal Holders

• Holder, Auto HP,  w/o Lockout Toggle, Gray
• Without Lockout Toggle
• Easy clean style
• Air operated actuator control
• Normally closed
• Durable plastic holder and machined alumimun-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 5983
Holder Valve, Auto HP, Normally Closed, Rear Port

Rear Port Micro Valve, Normally Closed

• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5947
Holder Valve, Auto HP, Normally Open, Side Port

Holder Valve, Auto HP, Normally Open, Side Port

• Normally open is used for positive air signal
• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 4869
Holder, Auto HP, Molded, Normally Closed, Gray

Asepsis Holder, Gray, Normally Closed

• Lt. Gray, Normally Closed
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 2973
Caster, Soft Wheel for Hard floors, Surf, Pkg of 5

Cart & Stool Casters

• Soft wheel for hard floor caster, Surf (pkg of 5)

PN 8222
Non-Slip Pad, 6" x 11.5"

Tray

• Non-Slip Pad, 6" x 11.5"
• Non Skid Pad

PN 4566
Holder, Standard, Molded, White

Asepsis Holders

• Holder, Standard, Molded, White
• Asepsis Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 2946
Caster, Soft Wheel For Hard Floors, Gray

Cart & Stool Casters  

• Soft wheel for hard floor caster, Gray

• Replacement for most dental stools
• Smooth rolling on tile and hardwood floors

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5970
Holder Assy, Vacuum, Gray

Universal Holder

• Holder Assy, Vacuum, Gray
• HVE Holder
• Holds vacuum valves from base
• For 1/2" bar-mounting

• Adjustable tilt angle

PN 5962
Holder Replacement, Standard, Gray

Replacement Holder

• Standard Holder
• Replacement holders for bracket assemblies

PN 8162
Adapter to Mount Water System to 2" Post, White Powder Coat

Adapter to Mount Water System to 2" Post, White Powder Coat

• Deluxe models have a selector toggle allowing you to switch between city & bottled water
• 750 ml & 2 liter heavy duty bottles
• Standard 28mm thread or patented quick-switch system for water bottle
• Gauge 7260 shows bottle pressure
• Bracket mounts to any flat vertical surface
• Optional post-mount available
• On/off toggle releases bottle pressure

PN 2948
Caster, Soft Wheel for Hard Floors, Surf

Cart & Stool Casters  

• Replacement for most dental stools
• Smooth rolling on tile and hardwood floors
• Soft wheel for hard floor caster, Surf

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5987
Holder, Auto HP, Molded, Normally Closed, LT Sand

Asepsis Holders

• Holder, Auto HP, Molded, Normally Closed, LT Sand
• Normally Closed
• Air operated actuator control.
• Resists chemical discoloration.
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5989
Holder Valve, Auto HP, Normally Open, Rear Port

Holder Valve, Auto HP, Normally Open, Rear Port

• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 5997
Stem w/O-Rings for Auto HP Holder Valve, Normally Closed

Stem w/O-Rings for Auto HP Holder Valve, Normally Closed

PN 5988
Holder, Standard, Molded, LT Sand

Asepsis Holders

• Holder, Standard, Molded, LT Sand
• Asepsis Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8337
Rigid Arm, 6", White

Folding Rigid Arm Sections

• 6" arm
• Mounts using 1/2" pin
• White scratch resistant powder coat finish

PN 5940
Holder, Auto HP, w/Lockout Toggle, Black

Universal Holders

• Holder, Auto HP, w/Lockout Toggle, Black
• With Lockout Toggle
• Easy clean style
• Air operated actuator control
• Normally closed
• Durable plastic holder and machined aluminum-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 5945
Holder Assy, Standard, Black

Universal Holder

• Holder Assy, Standard, Black
• Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Adjustable tilt angle
• For 1/2" bar-mounting
• Used with vacuum valves with tip extension

PN 5931
Holder Bracket, Single, Black

Holder Bracket

• Single, Black
• For use with 5900 through 5925 holders
• Durable plastic
• Mounting hardware Included

PN 5905
Holder, Standard, Black

Economy Holders

• Mounts on holder brackets 5929-5935
• Includes 10-32 mounting screw
• For HP, SE, HVE with Tip

PN 4568
Holder, Standard, Molded, Gray

Standard Asepsis Holder, Gray

• Holder, Standard, Molded, Gray
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle
• Air operated actuator control

PN 54108
Hard Floor Caster - PU Tread (taupe)

Cart & Stool Casters

• Hard Floor Caster, PU Tread, Taupe (DCI Edge/Reliance)

PN 9675
Compression Spring, .094 Diameter x .218 Long

Compression Spring, .094 Diameter x .218 Long

PN 5884
Holder Bar, 8", Gray

Holder Bar

• Holder Bar, Quad 8"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 8010
Caster, Cart, Gray

Cart & Stool Casters

• Hard wheel for carpet, Gray

PN 5881
Holder Bar, 2", Gray

Holder Bar

• Holder Bar, Single 2"
• For use with 4592 and 5940 through 5970 holders
• Mounting hardware

PN 5961
Holder Replacement, Auto HP , Gray

Replacement Holders

• Automatic HP Holder
• Replacement holders for bracket assemblies
• Durable plastic construction

PN 8410
Storage Tub, Includes Hinge, Dividers, & Lid

Plastic Tub for Trays & Carts, Storage Well w/ Organizers

• Storage Tub, Includes Hinge, Dividers, & Lid
• Mounting surface is 4" x 22"
• (A-dec® #16.0562.00)

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 52161G
Assy, 4-Way Holder, Series 5, Light Gray

Assistant’s Holders for DCI Edge Light Gray4-Position Holder, Series 5

PN 8378
Vertical Mount, 1/2" Pin, White

Surface Mount Brackets

• Vertical mount
• For mounting folding and telescoping arms to flat vertical surfaces
• Mounting plate 4" x 4"
• Accepts 1/2" O.D. pin
• White scratch resistant powder coat finish

PN 8336
Control Mount Bracket, White

Control Mount Bracket, White

• Mounting Bracket
• Use with folding rigid arms
• Mounts using 1/2" pin
• For DCI handpiece controls or assistant's instrumentation package 5430 and 5435
• White scratch resistant powder coat finish

PN 4576
Holder, L/R, Auto HP, Molded, Normally Closed, White w/Sterling Tubing

Asepsis Holders

• Holder, L/R, Auto HP, Molded, Normally Closed, White w/Sterling Tubing
• Automatic Handpiece Holders
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5910
Holder, Standard, Gray

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For HP, SE, HVE with Tip

PN 8356
Rigid Arm, 12", White

Folding Rigid Arm Sections

• 12" arm
• Mounts using 1/2" pin
• White scratch resistant powder coat finish

PN 8331
Holder Bar, Swing Mount, 4 Position

Swing Mount Holder Bar

• 4-Position Holder
• Mounts to vertical or horizontal surface
• White powder coat finish
• 3- or 4-position holder for syringe & vacuum valves held by tip

PN 5903
Holder, Vacuum, Black

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For HVE's

PN 8259
Post Mount, 2", White

Post Mount Brackets

• 2" post mount
• For mounting folding and telescoping arm assemblies to 2" diameter post
• Accepts 1/2" O.D. pin
• White scratch resistant powder coat finish

PN 8617
Reducing Bushing, 2" to 1.5"; Pkg of 2

Reducing Bushing

• Reducing Bushing From 2" to 1 1/2"

PN 5929
Holder Bracket, Single, Gray

Holder Bracket

• Single Gray Plastic

• For use with 5900 through 5925 holders
• Durable plastic
• Mounting hardware Included

PN 8186
Telescoping Arm w/4 Position Holder, White

Telescoping Breakaway Arm Systems

• Telescoping Arm w/4 Position Holder, White
• 24" to 46 3/4" horizontal reach
• 7 1/2" rigid arm
• Designed for mounting assistant's accessories
• Includes post-mount
• Use with 2" post-mount or wall-mount
• Breakaway feature protects equipment
• White powder coat