All Products in Holder Bars and Holders
90 Result Found
-
PN 5948
Holder Valve, Auto HP, Normally Closed, Side PortHolder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.
- Normally closed is used for 5940, 5960 and 4592 handpiece holders
Price:
-
PN 5965
Holder Assy, Standard, GrayUniversal Holder
- Holder Assy, Standard, Gray
- Standard Holder
- Used for handpieces, syringes, saliva ejectors
- Adjustable tilt angle
- Durable plastic holder and machined aluminum-mount
- For 1/2" bar-mounting
- Used with vacuum valves with tip extension
Price:
-
PN 4561
Holder, Auto HP, Molded, Normally Closed, WhiteAsepsis Holders
- Holder, Auto HP, Molded, Normally Closed, White
- Normally Closed
- Air operated actuator control.
- Resists chemical discoloration.
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
PN 5960
Holder, Auto HP, w/Lockout Toggle, GrayUniversal Holders
- Holder, Auto HP, w/Lockout Toggle, Gray
- With Lockout Toggle
- Easy clean sytle
- Air operated actuator control
- Normally closed
- Durable plastic holder aqnd machined aluminum-mount
- Designed for 1/2" bar-mounting with adjustable tilt angle
Price:
-
PN 4592
Holder, Auto HP, w/o Lockout Toggle, GrayUniversal Holders
- Holder, Auto HP, w/o Lockout Toggle, Gray
- Without Lockout Toggle
- Easy clean style
- Air operated actuator control
- Normally closed
- Durable plastic holder and machined alumimun-mount
- Designed for 1/2" bar-mounting with adjustable tilt angle
Price:
-
PN 5983
Holder Valve, Auto HP, Normally Closed, Rear PortRear Port Micro Valve, Normally Closed
- Air operated actuator control
- Resists chemical discoloration
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
PN 5947
Holder Valve, Auto HP, Normally Open, Side PortHolder Valve, Auto HP, Normally Open, Side Port
- Normally open is used for positive air signal
- 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
- 5983 normally closed is used for 4561
- 5947 normally open is used for positive air signal
Price:
-
PN 4869
Holder, Auto HP, Molded, Normally Closed, GrayAsepsis Holder, Gray, Normally Closed
- Lt. Gray, Normally Closed
- Air operated actuator control
- Resists chemical discoloration
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
PN 4566
Holder, Standard, Molded, WhiteAsepsis Holders
- Holder, Standard, Molded, White
- Asepsis Standard Holder
- Used for handpieces, syringes, saliva ejectors
- Used with vacuum valves with tip extension
- Resists chemical discoloration
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
PN 5970
Holder Assy, Vacuum, GrayUniversal Holder
- Holder Assy, Vacuum, Gray
- HVE Holder
- Holds vacuum valves from base
- For 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
PN 5962
Holder Replacement, Standard, GrayReplacement Holder
- Standard Holder
- Replacement holders for bracket assemblies
Price:
-
PN 5987
Holder, Auto HP, Molded, Normally Closed, LT SandAsepsis Holders
- Holder, Auto HP, Molded, Normally Closed, LT Sand
- Normally Closed
- Air operated actuator control.
- Resists chemical discoloration.
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
PN 5989
Holder Valve, Auto HP, Normally Open, Rear PortHolder Valve, Auto HP, Normally Open, Rear Port
- 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
- 5983 normally closed is used for 4561
- 5947 normally open is used for positive air signal
Price:
-
PN 5988
Holder, Standard, Molded, LT SandAsepsis Holders
- Holder, Standard, Molded, LT Sand
- Asepsis Standard Holder
- Used for handpieces, syringes, saliva ejectors
- Used with vacuum valves with tip extension
- Resists chemical discoloration
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
PN 5997
Stem w/O-Rings for Auto HP Holder Valve, Normally ClosedStem w/O-Rings for Auto HP Holder Valve, Normally Closed
Price:
-
PN 5940
Holder, Auto HP, w/Lockout Toggle, BlackUniversal Holders
- Holder, Auto HP, w/Lockout Toggle, Black
- With Lockout Toggle
- Easy clean style
- Air operated actuator control
- Normally closed
- Durable plastic holder and machined aluminum-mount
- Designed for 1/2" bar-mounting with adjustable tilt angle
Price:
-
PN 5931
Holder Bracket, Single, BlackHolder Bracket
- Single, Black
- For use with 5900 through 5925 holders
- Durable plastic
- Mounting hardware Included
Price:
-
PN 5905
Holder, Standard, BlackEconomy Holders
- Mounts on holder brackets 5929-5935
- Includes 10-32 mounting screw
- For HP, SE, HVE with Tip
Price:
-
PN 5945
Holder Assy, Standard, BlackUniversal Holder
- Holder Assy, Standard, Black
- Standard Holder
- Used for handpieces, syringes, saliva ejectors
- Adjustable tilt angle
- For 1/2" bar-mounting
- Used with vacuum valves with tip extension
Price:
-
PN 4568
Holder, Standard, Molded, GrayStandard Asepsis Holder, Gray
- Holder, Standard, Molded, Gray
- Used for handpieces, syringes, saliva ejectors
- Used with vacuum valves with tip extension
- Resists chemical discoloration
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
- Air operated actuator control
Price:
-
PN 5961
Holder Replacement, Auto HP , GrayReplacement Holders
- Automatic HP Holder
- Replacement holders for bracket assemblies
- Durable plastic construction
Price:
-
Holder Bar
- Holder Bar, Quad 8"
- For use with 4592 and 5940 through 5970 holders
- Precision milled aluminum
- Mounting hardware
- Gray holder bars are painted
Price:
-
Holder Bar
- Holder Bar, Single 2"
- For use with 4592 and 5940 through 5970 holders
- Mounting hardware
Price:
-
PN 52161G
Assy, 4-Way Holder, Series 5, Light GrayAssistant’s Holders for DCI Edge Light Gray4-Position Holder, Series 5
Price:
-
PN 5910
Holder, Standard, GrayEconomy Holders
- Mounts on holder brackets 5929 - 5935
- Includes 10-32 mounting screw
- For HP, SE, HVE with Tip
Price:
-
PN 8331
Holder Bar, Swing Mount, 4 PositionSwing Mount Holder Bar
- 4-Position Holder
- Mounts to vertical or horizontal surface
- White powder coat finish
- 3- or 4-position holder for syringe & vacuum valves held by tip
Price:
-
PN 4576
Holder, L/R, Auto HP, Molded, Normally Closed, White w/Sterling TubingAsepsis Holders
- Holder, L/R, Auto HP, Molded, Normally Closed, White w/Sterling Tubing
- Automatic Handpiece Holders
- Air operated actuator control
- Resists chemical discoloration
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
Economy Holders
- Mounts on holder brackets 5929 - 5935
- Includes 10-32 mounting screw
- For HVE's
Price:
-
PN 5929
Holder Bracket, Single, GrayHolder Bracket
- Single Gray Plastic
- For use with 5900 through 5925 holders
- Durable plastic
- Mounting hardware Included
Price:
-
PN 5912
Cavitron HP Sleeve AssyCavitron HP Sleeve Assy
- Adapts handpiece assembly to fit standard holders
- Molded plastic with set screw
Price:
-
PN 4564
Holder, Auto HP, Molded, Normally Open, WhiteAsepsis Holders
- Holder, Auto HP, Molded, Normally Open, White
- Normally Open
- Air operated actuator control.
- Resists chemical discoloration.
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
Economy Holders
- Mounts on holder brackets 5929 - 5935
- Includes 10-32 mounting screw
- For Syringes
Price:
-
Holder Bars
- Holder Bar, 10", Gray
- For use w/ 4592 & 5940 through 5970 holders
- Mounting Hardware Included
Price:
-
Economy Holders
- Mounts on holder brackets 5929 - 5935
- Includes 10-32 mounting screw
- For HVE's
Price:
-
PN 5900
Holder, Standard, WhiteEconomy Holders
- Mounts on holder brackets #5929-#5935
- Includes 10-32 mounting screw
- For HP, SE, HVE with Tip
Price:
-
Holder Bars
- For use with 4592 and 5940 through 5970 holders
- Precision milled aluminum
- Mounting hardware
- Gray holder bars are painted
Price:
-
PN 5969
Holder, Electric Auto, Normally Closed, GrayElectric Holders
- Normally Closed
- Holder assembly with low voltage switch for direct activation of electrical accessory
- On/off lockout toggle
- 125 Volts AC / DC 5 amps
- Automatic holder
Price:
-
PN 4578
Holder, Auto HP, Molded, Normally Closed, 4% GrayAsepsis Holders
- Holder, Auto HP, Molded, Normally Closed, 4% Gray
- Automatic Handpiece Holders
- Air operated actuator control
- Resists chemical discoloration
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
PN 4586
Holder, Syringe, Aseptic Clip-on, GrayAsepsis Clip-on Holders
- Holder, Syringe (SE or Extended HVE by the tip)
- HP holder has air operated actuator
Price:
-
PN 8335
Holder, 4-Position, Holds 2 HVE's by BaseAssistant’s Holders
- Holder, 4-Position, Holds 2 HVE's by Base
- Holds 2 HVE's by Base
- Mounts on 1/2" O.D. pin
- Mounting screw included
- 4-position holder for syringe and vacuum valves
Price:
-
Holder Bars
- Holder Bar, Triple 6"
- For use with 4592 and 5940 through 5970 holders
- Precision milled aluminum
- Mounting hardware
- Gray holder bars are painted
Price:
-
Holder Bar
- Holder Bar, Quad 8"
- For use with 4592 and 5940 through 5970 holders
- Precision milled aluminum
- Mounting hardware
- Black holder bars are anodized
Price:
-
PN 5915
Holder, Syringe, WhiteEconomy Holders
- Mounts on holder brackets 5929 - 5935
- Includes 10-32 mounting screw
- For Syringes
Price:
-
PN 5998
Stem w/O-Rings for Auto HP Holder Valve, Normally OpenStem w/O-Rings for Auto HP Holder Valve, Normally Open
Price:
-
PN 4580
Holder, Assy, Handpiece, Aseptic Clip-on,WhiteAsepsis Clip-on Holders
- Holder, Assy, Handpiece, Normally Closed
- HP holder has air operated actuator
Price:
-
PN 4445
Holder Bar, Under Counter Swing Mount, WhiteUnder Counter Holder Bar
- Cabinet-Mount Holder Bar
- For use with molded asepsis holders
- White powder coat
- Bar is 10-1/2" x 3-1/2"
Price:
-
PN 5950
Vacuum Holder Assy, Vacuum, BlackUniversal Holder
- Vacuum Holder Assy, Vacuum, Black
- HVE Holder
- Holds vacuum valves from base
- For 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
PN 5930
Holder Bracket, Single, WhiteHolder Bracket
- Single, White
- For use with 5900 through 5925 holders
- Durable plastic
- Mounting hardware Included
Price:
-
Holder Bars
- Holder Bar, Single 2"
- For use with 4592 and 5940 through 5970 holders
- Mounting hardware
- Black holder bars are anodized
Price:
-
Economy Holders
- Mounts on holder brackets 5929 - 5935
- Includes 10-32 mounting screw
- For HVE's
Price:
-
PN 4585
Holder, Syringe, Aseptic Clip-on, WhiteAsepsis Clip-on Holders
- Holder, Syringe (SE or Extended HVE by the tip)
- HP holder has air operated actuator
Price:
-
PN 4563
Holder, Electric Auto, Molded, Normally Closed, WhiteElectric Holders
- Normally Closed
- On/off lockout toggle, 5966-5969
- Holder assembly with low voltage switch for direct activation of electrical accessory
- 125 Volts AC / DC 5 amps
- Automatic Holder
Price:
-
PN 4868
Holder, Auto HP, Molded, Normally Open, GrayAsepsis Holders
- Holder, Auto HP, Molded, Normally Open, Gray
- Automatic Handpiece Holders
- Air operated actuator control
- Resists chemical discoloration
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
PN 8364
Holder, 4-Position, Holds SE & HVE by TipAssistant’s Holders
- Holder, 4-Position, Holds SE & HVE by Tip
- Holds 2 HVE's by Tip
- Mounts on 1/2" O.D. pin
- Mounting screw included
- 4-position holder for syringe and vacuum valves
Price:
-
PN 8343
Holder Bar, Swing Mount, 3 PositionSwing Mount Holder Bar
- 3-Position Holder
- Mounts to vertical or horizontal surface
- 3- or 4-position holder for syringe & vacuum valves held by tip
Price:
-
PN 5963
Holder Replacement, Vacuum, GrayReplacement Holder
- Vacuum Holder
- Replacement holders for bracket assemblies
Price:
-
PN 5914
Holder, Auto HP, Molded, Normally Open, White w/Sterling TubingAsepsis Holders
- Holder, Auto HP, Molded, Normally Open, White w/Sterling Tubing
- Automatic Handpiece Holders
- Air operated actuator control
- Resists chemical discoloration
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
PN 5967
Holder, Electric Auto, Normally Open, GrayElectric Holders
- Normally Open
- Holder assembly with low voltage switch for direct activation of electrical accessory
- 125 Volts AC / DC 5 amps
- On/off lockout toggle, 5966-5969
- Automatic holder
Price:
-
PN 4579
Holder, Standard, Molded, 4% GrayAsepsis Holders
- Holder, Standard, Molded, 4% Gray
- Automatic Handpiece Holders
- Air operated actuator control
- Resists chemical discoloration
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
PN 5920
Holder, Syringe, BlackEconomy Holders
- Mounts on holder brackets 5929 - 5935
- Includes 10-32 mounting screw
- For Syringes
Price:
-
PN 4582
Holder, Vacuum, Aseptic Clip-on WhiteAsepsis Clip-on Holders
- Holder, Vacuum, HVE (by the base)
- HP holder has air operated actuator
Price:
-
PN 8241
Horseshoe Holder Bar w/Standard Holders, WhiteHorseshoe Assistant’s Holder Bar
- Bar and holders
- Includes three holders
- 1/2" O.D. pin
Price:
-
PN 4581
Holder, Assy, Handpiece, Aseptic Clip-on, GrayAsepsis Clip-on Holders
- Holder, Assy, Handpiece, Normally Closed
- HP holder has air operated actuator
Price:
-
Holder Bar
- Holder Bar, 14"
- For use with 4592 and 5940 through 5970 holders
- Precision milled aluminum
- Mounting hardware
- Gray holder bars are painted
Price:
-
PN 8633
Holder Bar, 4 Position, Holds SE & HVE by BaseAssistant’s Holder Bars for Telescoping Arm
- Holder Bar, 4 Position, Holds SE & HVE by Base
- Holds SE and HVE by Base
- Mounts on end of 1/2" O.D. bar
- Holder for syringe and vacuum valves
Price:
-
PN 8332
Holder Bar, 4 Position, Holds SE & HVE by TipAssistant’s Holder Bars for Telescoping Arm
- Holder Bar, 4 Position, Holds SE & HVE by Tip
- Holds SE and HVE by Tip
- Mounts on end of 1/2" O.D. bar
- Holder for syringe and vacuum valves
Price:
-
PN 4583
Holder, Vacuum, Aseptic Clip-on, GrayAsepsis Clip-on Holders
- Holder, Vacuum, HVE (by the base)
- HP holder has air operated actuator
Price:
-
PN 5942
Holder Replacement, Standard, BlackReplacement Holders
- Standard holder
- Replacement holders for bracket assemblies
- Durable plastic construction
Price:
-
PN 5932
Holder Bracket, 2-Position, AluminumHolder Bracket
- 2-Position, Aluminum
- For use with 5900 through 5925 holders
- Durable precision milled aluminum
- Mounting hardware Included
Price:
-
PN 5933
Holder Bracket, 3-Position, AluminumHolder Bracket
- 3-Position, Aluminum
- For use with 5900 through 5925 holders
- Durable precision milled aluminum
- Mounting hardware Included
Price:
-
PN 5976
Holder, Electric Auto, Vacuum, Normally Closed, GrayElectric Auto Holders
- HVE Normally Closed
- Holder assembly with low voltage switch for direct activation of electrical accessory
- On/off lockout toggle
- 125 Volts AC / DC 5 amps
- Automatic holder
Price:
-
PN 8333
Holder, 3-Position, Holds SE & HVE by BaseAssistant’s Holders
- Holder, 3-Position, Holds SE & HVE by Base
- Holds HVE by Base
- Mounts on 1/2" O.D. pin
- Mounting screw included
- 3-position holder for syringe and vacuum valves
Price:
-
PN 5943
Holder Replacement, Vacuum, BlackReplacement Holders
- Vacuum Holder
- Replacement holders for bracket assemblies
Price:
-
PN 4444
Holder Bar, Under Counter Swing Mount, GrayUnder Counter Holder Bar
- Cabinet-Mount Holder Bar
- For use with molded asepsis holders
- Gray powder coat
- Bar is 10-1/2" x 3-1/2"
Price:
-
Holder Bar
- Holder Bar, Triple 6"
- For use with 4592 and 5940 through 5970 holders
- Precision milled aluminum
- Mounting hardware
- Black holder bars are anodized
Price:
-
PN 4562
Holder, Electric Auto, Molded, Normally Open, WhiteElectric Holders
- Normally Open
- Holder assembly with low voltage switch for direct activation of electrical accessory
- 125 Volts AC / DC 5 amps
- On/off lockout toggle, 5966-5969
- Automatic holder
Price:
-
PN 5972
Actuator Lever for 5960, GrayActuator Lever for 5960, Gray
Price:
-
PN 5926
Holder Bar, 10", BlackHolder Bar
- Holder Bar, 10", Black
- For use w/ 4592 & 5940 through 5970 holders
- Mounting Hardware Included
Price:
-
PN 8237
Telescoping Arm w/4 Position Holder, AnodizedTelescoping Breakaway Arm Systems
- Telescoping Arm w/4 Position Holder, Anodized
- 24" to 46 3/4" horizontal reach
- 7 1/2" rigid arm
- Designed for mounting assistant's accessories
- Includes post-mount
- Use with 2" post-mount or wall-mount
- Breakaway feature protects equipment
Price:
-
Holder Bars
- Holder Bar, Dual 4"
- For use with 4592 and 5940 through 5970 holders
- Precision milled aluminum
- Mounting hardware
- Black holder bars are anodized
Price:
-
PN 8632
Holder Bar, 3 Position, Holds SE & HVE by BaseAssistant’s Holder Bars for Telescoping Arm
- Holder Bar, 3 Position, Holds SE & HVE by Base
- Holds SE and HVE by Base
- Mounts on end of 1/2" O.D. bar
- Holder for syringe and vacuum valves
Price:
-
PN 5934
Holder Bracket, 4-Position, AluminumHolder Bracket
- 4-Position, Aluminum
- For use with 5900 through 5925 holders
- Durable precision milled aluminum
- Mounting hardware Included
Price:
-
PN 8334
Holder, 3-Position, Holds SE & HVE by TipAssistant’s Holders
- Holder, 3-Position, Holds SE & HVE by Tip
- Holds HVE by Tip
- Mounts on 1/2" O.D. pin
- Mounting screw included
- 3-position holder for syringe and vacuum valves
Price:
-
PN 5941
Holder Replacement, Auto HP , BlackReplacement Holders
- Automatic HP Holder
- Replacement holders for bracket assemblies
Price:
-
PN 8402
Horseshoe Holder Bar w/Standard Holders, GrayHorseshoe Assistant’s Holder Bar
- Bar and holders
- Includes three holders
- 1/2" O.D. pin
- Gray powder coat
Price:
-
PN 52161W
Assy, 4-Way Holder, Series 5, WhiteAssistant’s Holders for DCI Edge
- 4-Position Holder, Series 5
Price:
-
PN 8242
Holder Bar, 3 Position, Holds SE & HVE by TipAssistant’s Holder Bars for Telescoping Arm
- Holder Bar, 3 Position, Holds SE & HVE by Tip
- Holds SE and HVE by Tip
- Mounts on end of 1/2" O.D. bar
- Holder for syringe and vacuum valves
Price:
-
PN 5955
Holder Bar, 14", BlackHolder Bar,
- Holder Bar, 14"
- For use with 4592 and 5940 through 5970 holders
- Precision milled aluminum
- Mounting hardware
- Black holder bars are anodized
Price:
-
PN 5968
Holder, Electric Auto, Normally Closed, BlackElectric Holders
- Normally Closed
- Holder assembly with low voltage switch for direct activation of electrical accessory
- On/off lockout toggle
- 125 Volts AC / DC 5 amps
- Automatic holder
Price:
-
PN 5966
Holder, Electric Auto, Normally Open, BlackElectric Holders
- Normally Open
- Holder assembly with low voltage switch for direct activation of electrical accessory
- 125 Volts AC / DC 5 amps
- On/off lockout toggle, 5966-5969
- Automatic holder
Price: