PN 5754
Saliva Ejector Tip Push-on Autoclavable, Gray

Push On Tip to fit A-dec® Saliva Ejectors, Gray Tip, (A-dec® #12.0183.01)

• Push-on Autoclavable, Gray
• Push-on or screw-on
• Tips are autoclavable
• Latex-free

PN 7140
Check Valve w/Ball, 1/16" Barb

Check Valve w/Ball 1/16" Barb

• For use with non water retraction
• 1/16" barbs or 1/8" barbs
• Allows flow in 1 direction only

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 2201
O-Ring, Buna-n, .056 I.D. X .060 Width, -003; Pkg of 12

O-Ring, Buna-n, .056 I.D. X .060 Width, -003

• Material - Buna-n
• I.D. x Cross Section - .056 x .060
• Package of 12

PN 7052
Needle Valve w/Knob, Gray

Needle Valve W/Knob, Gray

• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread with nut
• Includes 1/16" hex allen wrench

PN 0065
10-32 Tee Connector, Female

10-32 Female Tee

PN 0077
1/16" In-line Barb; Pkg of 10

1/16" Plated In-Line Metal Barb

• Package of 10

PN 7001
Toggle Routing Valve, 2-Way, Gray

Toggle Routing “Selector” Valve Hex Body, 2-Way, Gray

• Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
• Panel-mounting 15/32-32 thread with nut
• For air or water

PN 0951
1/16" Barb Tee, Metal

1/16" Metal Tee

• For use with 1/8" O.D. tubing

PN 0124
5-Hole HP Gasket

Autoclavable HP Gasket - 5 Hole Midwest

PN 0072
10-32 Washer, Plastic; Pkg of 100

10-32 Plastic Washers

• Package of 100

PN 7016
Toggle Valve, On/Off, 3-Way, Gray

Toggle Valve Hex Body, On/Off, 3-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 0064
10-32 Cross Connector, Female

10-32 Female Cross 4-Way

• Package of 1

PN 0070
1/4" Clamp Sleeve; Pkg of 10

1/4" Clamp Sleeve

• For use with 1/4" O.D. tubing
• Package of 10

PN 0078
1/8" In-line Barb; Pkg of 10

1/8" Plated In-line Barb

• Package of 10 

PN 0082
1/16" Barb Tee, Plastic; Pkg of 10

1/16" Barb Tee White Plastic

• For use with 1/8" O.D. tubing
• Package of 10

PN 0071
1/8" Clamp Sleeve; Pkg of 10

1/8" Clamp Sleeve

• For use with 1/8" O.D. tubing
• Package of 10

PN 0198
1/8" Clamp Sleeve; Pkg of 100

1/8" Plastic Clamp Sleeve

• For use with 1/8" O.D. tubing
• Package of 100

PN 7070
Air Pilot Valve, 2-Way, Normally Closed

Air Pilot Valve, 2-Way, Normally Closed

• For air and water
• Barb fitting for 1/8 O.D. tubing
• Air actuated on/off control
• Panel-mount 15/32-32 thread with nut
• Requires 25 PSI

PN 5983
Holder Valve, Auto HP, Normally Closed, Rear Port

Rear Port Micro Valve, Normally Closed

• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5947
Holder Valve, Auto HP, Normally Open, Side Port

Holder Valve, Auto HP, Normally Open, Side Port

• Normally open is used for positive air signal
• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 7012
Toggle Valve, On/Off, 2-Way, Gray

Toggle Valve On/Off Hex Body, 2-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 0021
1/4" Poly Nut & Sleeve; Pkg of 5

1/4" Poly Nut & Sleeve

• Package of 5

PN 7078
Valve Mounting Bracket, Single

Valve Mounting Bracket, Single

• 1/2" I.D. mounting holes
• White powder coat finish
• Mounts toggles, indicators, Q.D.'s and air electric switches
• Single Mount, L: 1 1/2" H: 7/8" W: 3/4"

PN 2254
O-Ring, Viton, .426 I.D. X .070 Width, -013; Pkg of 12

O-Ring, Viton, .426 I.D. X .070 Width, -013

• Material - Viton
• I.D. x Cross Section - .426 x .070
• Package of 12

PN 0075
1/8" Barb, Washer and Sleeve Kit; Pkg of 10

1/8" Barb Fitting Plated

• 10-32 x 1/8" Barb
• For use with 1/4" O.D. tubing
• Includes sleeve & washer
• Package of 10

PN 7090
Shuttle Valve, 1/8"

Shuttle Valve, 1/8"

• For routing two different flows through one output
• For 1/8" tubing

PN 0074
1/16" Barb, Washer and Sleeve kit; Pkg of 10

1/16" Barb Fitting Plated

• 10-32 x 1/16" Barb (pkg of 10)
• For 1/8" O.D. tubing
• Includes sleeve & washer

PN 0197
1/4" Clamp Sleeve; Pkg of 100

1/4" Plastic Clamp Sleeve

• For use with 1/4" O.D. tubing
• Package of 25

PN 2203
O-Ring, Buna-n, .114 I.D. X .070 Width, -006; Pkg of 12

O-Ring 11-006, Buna-n, .114 I.D. X .070 Width,

• Material - Buna-n
• I.D. x Cross Section - .114 x .070
• Package of 12
• (A-dec® #030.006.02)

PN 7021
Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 0083
1/8" Barb Tee, Plastic; Pkg of 10

1/8" Barb Tee White Plastic

• For use with 1/4" O.D. tubing
• Package of 10

PN 7124
Toggle Only, Detented w/Pin, Gray

Toggle Only, Detented w/Pin, Gray

• On/Off Toggle w/ Pin

PN 5989
Holder Valve, Auto HP, Normally Open, Rear Port

Holder Valve, Auto HP, Normally Open, Rear Port

• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 7026
Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 0188
10-32 x 1/8", Barb; Pkg of 100

1/8" Barb Only

• For use with 1/4" O.D. tubing
• Includes sleeve & washer
• Package of 100

PN 2256
O-Ring, Viton, .239 I.D. X .070 Width, -010; Pkg of 12

O-Ring, Viton, .239 I.D. X .070 Width, -010

• Material - Viton
• I.D. x Cross Section - .239 x .070
• Package of 12

PN 7151
Toggle Routing Valve, Side Ported, Gray

Replacement A-dec® Routing Toggle Valve “Side Barb”, Gray Selector / Routing Valve, (A-dec® #33.0104.04) (A-dec® #33.0048.01) 

• Gray master toggle switch
• Fits Century® II manual control systems
• Panel mounting 15/32-32 thread with nut
• Routes signal air
• Port barbs for 1/8" O.D. tubing
• Exhausting valve, for air only

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® and Century® are a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 0189
10-32 Hex Plug; Pkg of 100

10-32 Hex Plug Only

• Package of 100
• Includes washer

PN 0952
1/16" Cross Connector, Metal

1/8" Cross Metal

• For use with 1/8" O.D. tubing
• Nickel plated

PN 7027
Toggle Valve, Momentary Gray 3-Way, Normally Open, Gray

Toggle Momentary Valve “Hex Body” Gray 3-Way, Normally Open, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 0023
1/4" Poly Sleeve; Pkg of 10

1/4" Poly Sleeve "Ferrule"

• Package of 10

PN 7123
Toggle Only, Detented w/Pin, Black

Toggle Only, Detented w/Pin, Black

• On/Off Toggle w/ Pin

PN 7039
Toggle Only, Momentary w/Pin Assy, Gray

Toggle Only, Momentary w/Pin Assy, Gray

PN 7164
Rear Ported Valve, 2-Way, Gray

Toggle On/Off Rear Ported Valve, 2-Way, Gray 

• 2-Way Valve for air or water
• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water

PN 7166
Cup Filler Valve, Momentary, 2-Way, Gray

Cup Filler Valve, Momentary On/Off, 2-Way, Gray, Round Body

• Cuspidor Valve
• Threaded hex fitting for flow
• 2-way (non-exhausting) for water
• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• Fits cuspidor models prior to 1982

PN 7014
Toggle Valve, Momentary, 2-Way w/Special Toggle

Toggle Valve, Momentary, 2-Way w/Special Toggle

• Extended Handle
• Momentary action
• 2 -way configuration used on cup filler