PN 4421
Automatic HP Tri-Block

Tri-Block w/ Std. Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"

PN 7021
Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 7260
Round Pressure Gauge, 0-160 PSI

Pressure Gauge 1 1/2" Face

• Rear Mounted Pressure Gauge
• 0-160 PSI pressure reading
• For air or water
• 1 1/2" diameter
• 1/8" MPT thread / 10-32 Female

PN 8312
Junction Box, Standard, Housing & Cover Only, Gray

Economy Utility Center

• Utility Center Housing Only, with Cover Gray
• Provides filtered, regulated air & water for assistant’s unit
• Mounts on floor or wall (plumbing template included)
• Accommodates up to 1 3/4" umbilicals
• Two integrated master shut-off valves w/ regulator & filter (7212)
• Two manual shut-off valves (7099) • 3-way on/off toggle valve (7016)
• Stainless steel housing 14" x 9" x 4 1/2"

PN 7100
Manual Shut-Off Valve, 1/2" FPT Inlet

Manual Shut-Off Valve, 1/2" FPT Inlet

• 1/2" nominal compression (7099)
• 1/2" FPT inlet (7100
• 3/8" O.D. tube compression fitting outlet

PN 7253
Filter Element Disc, Bronze; Pkg of 2

Bronze Filter Disc (pkg of 2)

• 35 micron filtration
• Air or water
• 1" diameter x 1" long

PN 7026
Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 7251
In-Line Filter, 10-32 Port

In-Line Filter, 10-32 Port

• 35 micron filtration
• 1" diameter by 1" long
• Air or water

PN 7022
Flow Restrictor

Flow Restrictor

• Variable control for air and water
• For 1/8" O.D. or 1/4" O.D. tubing

PN 7069
Knob Only, Needle Valve, Gray

Knob Only, Needle Valve, Gray

• Flow Control Valve - "Hex Body"
• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread w/ nut
• Variable restriction for air & water
• Pinch valve
• Accommodates 1/8" or 1/4" O.D. tubing

PN 7141
Check Valve w/Ball, 1/8" Barb

Check Valve w/Ball 1/8" Barb

• For use with non water retraction
• 1/16" or 1/8" barbs
• Allows flow in 1 direction only

PN 7265
Round Pressure Gauge, Panel Mount, 0-100 PSI

Pressure Gauge 1 1/2" Face

• Panel Mount Pressure Gauge
• 0-100 PSI pressure reading
• Panel-mount bracket requires 1 5/8" hole
• 10-32 I.D. thread rear, 1/8" MPT thread
• 1 3/4" diameter
• For air or water

PN 7113
BRACKET 2 POSITION ASSY 1/4 X 3/8

3/4" & 1/2" I.D. Toggle Mounting Bracket

• One 1/2" mounting hole for 1/4" Q.D.'s
• Q.D. Mounting Bracket, L: 3" H: 7/8" W: 3/4"
• One mounting hole for 3/8" Q.D's
• White powder coat finish

PN 4425
Automatic HP Quad-Block

HP Quad-Block w/Std. Adjustment Screws

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"

PN 8322
Utility Center, Standard, Less Housing & Cover

Standard Utility Center

• Utility Center, Less Housing and Cover
• Mounts on floor or wall (plumbing template included)
• Slotted holes allow installation without disconnecting tubing
• Accommodates up to 1 3/4" umbilicals
• Two master shut-off valves w/ 1/2" MPT to 3/8" compression fittings (0904)
• Stainless steel housing 14"x 9"x 4 1/2"
• Two non-relieving regulators (7220)
• Two pressure gauges (7260)
• Two in-line filters (7250)
• Two manual shut-off valves (7099

PN 8321
Utility Center, Standard w/Housing & Cover, Gray

Standard Utility Center

• Standard utility center with housing and cover, Gray
• Mounts on floor or wall (plumbing template included)
• Slotted holes allow installation without disconnecting tubing
• Accommodates up to 1 3/4" umbilicals
• Two master shut-off valves w/ 1/2" MPT to 3/8" compression fittings (0904)
• Stainless steel housing 14"x 9"x 4 1/2"
• Two non-relieving regulators (7220)
• Two pressure gauges (7260)
• Two in-line filters (7250)
• Two manual shut-off valves (7099

PN 4427
Automatic HP Quin-Block

Quin-Block w/ Std. Adjustment Screws

• Works with normally automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Individual drive air adjustment screws
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quin-Block dimensions: 3 3/4" x 1 1/2" x 1"

PN 7075
Air Pilot Valve, 3-Way, Normally Closed

Air Pilot Valve, 3-Way, Normally Closed

• For air only
• Barb fitting for 1/8 O.D. tubing
• Air actuated on/off control
• Panel-mount 15/32-32 thread with nut
• Requires 25 PSI

PN 7223
Regulator Mounting Bracket w/ Nut

Mounting Bracket w/ Nut 

• 1/8 FPT ports
• Quick removal threaded bowl
• Self-relieving
• Filter with 5 micron element
• Corrosion resistant construction
• Diaphragm operated
• Must be mounted in vertical position
• Turn clockwise to increase pressure