PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Valve, Auto HP, Normally Closed, Side Port

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 5965
Holder Assy, Standard, Gray

Holder Assy, Standard, Gray

• Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Adjustable tilt angle
• Durable plastic holder and machined aluminum-mount
• For 1/2" bar-mounting
• Used with vacuum valves with tip extension

PN 4561
Holder, Auto HP, Molded, Normally Closed, White

Holder, Auto HP, Molded, Normally Closed, White

• Normally Closed
• Air operated actuator control.
• Resists chemical discoloration.
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8013
Tray, Stainless Steel, 9-3/4" x 13-1/2"

Tray, Stainless Steel, 9-34" x 13-1/2"

• Stainless Steel Tray (B Size)
• 9 3/4 X 13 1/2" (B Size)

PN 5983
Holder Valve, Auto HP, Normally Closed, Rear Port

Holder Valve, Auto HP, Normally Closed, Rear Port

• 5983 normally closed and is used for 4561

PN 4566
Holder, Standard, Molded, White

Holder, Standard, Molded, White

• Asepsis Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 4869
Holder, Auto HP, Molded, Normally Closed, Gray

Asepsis Holder, Lt. Gray, Normally Closed

• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8410
Storage Tub, Includes Hinge, Dividers, & Lid

Storage Tub, Includes Hinge, Dividers, & Lid (A-dec® #16.0562.00) Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 4568
Holder, Standard, Molded, Gray

Holder, Standard, Molded, Gray

• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8335
Holder, 4-Position, Holds 2 HVE's by Base

Holder, 4-Position, Holds 2 HVE's by Base

• Holds 2 HVE's by Base
• Mounts on 1/2" O.D. pin
• Mounting screw included
• 4-position holder for syringe and vacuum valves

PN 8253
Post Mount, 2", Gray

Post Mount, 2",  Gray

• 2" post mount
• For mounting folding and telescoping arm assemblies to 2" diameter post
• Accepts 1/2" O.D. pin
• Gray scratch resistant powder coat finish

PN 8390
Utility Shelf, Post Mount, Gray

Utility Shelf, Post Mount, Gray

• 2" post or H-frame mount
• Pivots on mounting bracket for easy access
• Mounting bracket included
• Mounts using 1/2" pin
• Gray powder coat
• 12" x 12" surface area

PN 4868
Holder, Auto HP, Molded, Normally Open, Gray

Holder, Auto HP, Molded, Normally Open, Gray

PN 9631
NYLINER 1/16 WALL THICKNESS

Post-Mounting for Arms

• For mount

PN 8006
Cart Frame, Small U-Frame

Cart Frame, Small U-Frame

• Adjustable vertical height of 23" to 32"
• 15 degree angled upright
• Satin chrome finish
• 2" diameter with 3" x 3" mounting plate
• Twin wheel casters roll freely on carpet or hard flooring
• 18" W x 18" D