All Replacement Parts by Marus in Holder Bars and Holders

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 5965
Holder Assy, Standard, Gray

Universal Holder

• Holder Assy, Standard, Gray
• Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Adjustable tilt angle
• Durable plastic holder and machined aluminum-mount
• For 1/2" bar-mounting
• Used with vacuum valves with tip extension

PN 4561
Holder, Auto HP, Molded, Normally Closed, White

Asepsis Holders

• Holder, Auto HP, Molded, Normally Closed, White
• Normally Closed
• Air operated actuator control.
• Resists chemical discoloration.
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5960
Holder, Auto HP, w/Lockout Toggle, Gray

Universal Holders

• Holder, Auto HP, w/Lockout Toggle, Gray
• With Lockout Toggle
• Easy clean sytle
• Air operated actuator control
• Normally closed
• Durable plastic holder aqnd machined aluminum-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 5983
Holder Valve, Auto HP, Normally Closed, Rear Port

Rear Port Micro Valve, Normally Closed

• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 4566
Holder, Standard, Molded, White

Asepsis Holders

• Holder, Standard, Molded, White
• Asepsis Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5970
Holder Assy, Vacuum, Gray

Universal Holder

• Holder Assy, Vacuum, Gray
• HVE Holder
• Holds vacuum valves from base
• For 1/2" bar-mounting

• Adjustable tilt angle

PN 5962
Holder Replacement, Standard, Gray

Replacement Holder

• Standard Holder
• Replacement holders for bracket assemblies

PN 4568
Holder, Standard, Molded, Gray

Standard Asepsis Holder, Gray

• Holder, Standard, Molded, Gray
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle
• Air operated actuator control

PN 5881
Holder Bar, 2", Gray

Holder Bar

• Holder Bar, Single 2"
• For use with 4592 and 5940 through 5970 holders
• Mounting hardware

PN 5884
Holder Bar, 8", Gray

Holder Bar

• Holder Bar, Quad 8"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 8331
Holder Bar, Swing Mount, 4 Position

Swing Mount Holder Bar

• 4-Position Holder
• Mounts to vertical or horizontal surface
• White powder coat finish
• 3- or 4-position holder for syringe & vacuum valves held by tip

PN 5882
Holder Bar, 4", Gray

Holder Bars

• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 8335
Holder, 4-Position, Holds 2 HVE's by Base

Assistant’s Holders

• Holder, 4-Position, Holds 2 HVE's by Base
• Holds 2 HVE's by Base
• Mounts on 1/2" O.D. pin
• Mounting screw included
• 4-position holder for syringe and vacuum valves

PN 5883
Holder Bar, 6", Gray

Holder Bars

• Holder Bar, Triple 6"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 8343
Holder Bar, Swing Mount, 3 Position

Swing Mount Holder Bar

• 3-Position Holder
• Mounts to vertical or horizontal surface
• 3- or 4-position holder for syringe & vacuum valves held by tip

PN 5963
Holder Replacement, Vacuum, Gray

Replacement Holder

• Vacuum Holder
• Replacement holders for bracket assemblies

PN 5967
Holder, Electric Auto, Normally Open, Gray

Electric Holders

• Normally Open
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• On/off lockout toggle, 5966-5969
• Automatic holder

PN 5976
Holder, Electric Auto, Vacuum, Normally Closed, Gray

Electric Auto Holders

• HVE Normally Closed
• Holder assembly with low voltage switch for direct activation of electrical accessory
• On/off lockout toggle
• 125 Volts AC / DC 5 amps
• Automatic holder

PN 5972
Actuator Lever for 5960, Gray

Actuator Lever for 5960, Gray