PN 5754
Saliva Ejector Tip Push-on Autoclavable, Gray

Push On Tip to fit A-dec® Saliva Ejectors, Gray Tip, (A-dec® #12.0183.01)

• Push-on Autoclavable, Gray
• Push-on or screw-on
• Tips are autoclavable
• Latex-free

PN 7140
Check Valve w/Ball, 1/16" Barb

Check Valve w/Ball 1/16" Barb

• For use with non water retraction
• 1/16" barbs or 1/8" barbs
• Allows flow in 1 direction only

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 2201
O-Ring, Buna-n, .056 I.D. X .060 Width, -003; Pkg of 12

O-Ring, Buna-n, .056 I.D. X .060 Width, -003

• Material - Buna-n
• I.D. x Cross Section - .056 x .060
• Package of 12

PN 7052
Needle Valve w/Knob, Gray

Needle Valve W/Knob, Gray

• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread with nut
• Includes 1/16" hex allen wrench

PN 0065
10-32 Tee Connector, Female

10-32 Female Tee

PN 0077
1/16" In-line Barb; Pkg of 10

1/16" Plated In-Line Metal Barb

• Package of 10

PN 7001
Toggle Routing Valve, 2-Way, Gray

Toggle Routing “Selector” Valve Hex Body, 2-Way, Gray

• Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
• Panel-mounting 15/32-32 thread with nut
• For air or water

PN 0072
10-32 Washer, Plastic; Pkg of 100

10-32 Plastic Washers

• Package of 100

PN 7016
Toggle Valve, On/Off, 3-Way, Gray

Toggle Valve Hex Body, On/Off, 3-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 0064
10-32 Cross Connector, Female

10-32 Female Cross 4-Way

• Package of 1

PN 2230
O-Ring, Buna-n, .042 X .050 Width, -002; Pkg of 12

O-Ring 11-002, Buna-n, .042 X .050 Width

• Material - Buna-n
• I.D. x Cross Section - .042 x .050
• Package of 12
• (A-dec® #030.002.00)

PN 0078
1/8" In-line Barb; Pkg of 10

1/8" Plated In-line Barb

• Package of 10 

PN 0071
1/8" Clamp Sleeve; Pkg of 10

1/8" Clamp Sleeve

• For use with 1/8" O.D. tubing
• Package of 10

PN 7084
Air Electric Switch, 10 PSI, Normally Open

Air Electric Switch, 10 PSI, Normally Open, to fit A-dec® Handpiece Control (A-dec® #044.158.00) 

• Activated at 10 PSI or 25 PSI
• On/off control of up to 120Volt, 1 amp
• 125 PSI max
• Normally open or closed
• 0-60 PSI reading
• 1/2" H x 1 3/4" W
• For air only
• Vibration & shock resistant

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 2297
O-Ring, Buna-n, .799 I.D. X .103 Width; Pkg of 12

O-Ring, Buna-n, .799 I.D. X .103 Width

• Easy installation requires no tools
• Saves time in changing bottles
• Self-locking feature ensures proper positioning when pressurized
• Automatic pressure release when removing bottle
• Patented design exclusive to DCI

PN 7012
Toggle Valve, On/Off, 2-Way, Gray

Toggle Valve On/Off Hex Body, 2-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 5947
Holder Valve, Auto HP, Normally Open, Side Port

Holder Valve, Auto HP, Normally Open, Side Port

• Normally open is used for positive air signal
• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 2254
O-Ring, Viton, .426 I.D. X .070 Width, -013; Pkg of 12

O-Ring, Viton, .426 I.D. X .070 Width, -013

• Material - Viton
• I.D. x Cross Section - .426 x .070
• Package of 12

PN 7090
Shuttle Valve, 1/8"

Shuttle Valve, 1/8"

• For routing two different flows through one output
• For 1/8" tubing

PN 2203
O-Ring, Buna-n, .114 I.D. X .070 Width, -006; Pkg of 12

O-Ring 11-006, Buna-n, .114 I.D. X .070 Width,

• Material - Buna-n
• I.D. x Cross Section - .114 x .070
• Package of 12
• (A-dec® #030.006.02)

PN 0083
1/8" Barb Tee, Plastic; Pkg of 10

1/8" Barb Tee White Plastic

• For use with 1/4" O.D. tubing
• Package of 10

PN 2253
O-Ring, Viton, .447 I.D. X .052 Width; Pkg of 12

O-Ring, Viton, .447 I.D. X .052 Width

• Material - Viton
• I.D. x Cross Section - .447 x .052
• Package of 12

PN 2212
O-Ring, Buna-n, .180 I.D. X .040 Width; Pkg of 12

O-Ring, Buna-n, .180 I.D. X .040 Width

• Material - Buna-n
• I.D. x Cross Section - .180 x .040
• Package of 12

PN 8621
Tubing Stripper

Tubing Stripper

PN 5989
Holder Valve, Auto HP, Normally Open, Rear Port

Holder Valve, Auto HP, Normally Open, Rear Port

• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 2205
O-Ring, Buna-n, .176 I.D. X .070 Width, -008; Pkg of 12

O-Ring, Buna-n, .176 I.D. X .070 Width, -008

• Material - Buna-n
• I.D. x Cross Section - .176 x .070
• Package of 12

PN 5621
Valve Cleaning SE Brush; Pkg of 5

Valve Cleaning Brush

• SE Brush (pkg of 5)
• 3" bristles

PN 7089
Air Electric Switch, 10 PSI, Normally Closed

Air Electric Switch, 10 PSI, Normally Closed (A-dec® #044.159.00) 

• Activated at 10 PSI or 25 PSI
• On/off control of up to 120V, 5 amp
• 15/32-32 thread with nut
• 125 PSI max

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5620
Valve Cleaning HVE Brush; Pkg of 5

Valve Cleaning Brush

• Package of 5 
• 3 3/4" bristles

PN 0952
1/16" Cross Connector, Metal

1/8" Cross Metal

• For use with 1/8" O.D. tubing
• Nickel plated

PN 8697
Pelton & Crane Gas Spring Adjusting Tool

Pelton & Crane® Gas Spring Adjusting Tool

• Gas Spring Adjusting Tool,(OEM #016749)

• For adjusting LF II light arm cyclinder
• 5/16" Hex

PN 2207
O-Ring, Buna-n, .426 I.D. X .070 Width, -013; Pkg of 12

Body O-Ring, Buna-n, .426 I.D. X .070 Width, -013

• Material - Buna-n
• I.D. x Cross Section - .426 x .070
• Package of 12

PN 2214
O-Ring, Buna-n, .239 I.D. X .070 Width, -010; Pkg of 12

O-Ring, Buna-n, .239 I.D. X .070 Width, -010

• Material - Buna-n
• I.D. x Cross Section - .239 x .070
• Package of 12

PN 2252
O-Ring, Viton, .053 I.D. X .064 Width; Pkg of 12

O-Ring, Viton, .053 I.D. X .064 Width

• Material - Viton
• I.D. x Cross Section - .053 x .064
• Package of 12

PN 2238
O-Ring, Buna-n, .801 I.D. X .070 Width, -019; Pkg of 12

O-Ring, Buna-n, .801 I.D. X .070 Width, -019

• Material - Buna-n
• I.D. x Cross Section - .801 x .070
• Package of 12

PN 7014
Toggle Valve, Momentary, 2-Way w/Special Toggle

Toggle Valve, Momentary, 2-Way w/Special Toggle

• Extended Handle
• Momentary action
• 2 -way configuration used on cup filler

PN 2260
O-Ring, Buna-n, .270 I.D. X .070 Width; Pkg of 12

O-Ring, Buna-n, .270 I.D. X .070 Width

• Material - Buna-n
• I.D. x Cross Section - .270 x .070
• Package of 12

PN 2236
O-Ring, Buna-n, .614 I.D. X .070 Width, -016; Pkg of 12

O-Ring, Buna-n, .614 I.D. X .070 Width, -016

• Material - Buna-n
• I.D. x Cross Section - .614 x .070
• Package of 12

PN 2246
O-Ring, Buna-n, 2.109 I.D. X .139 Width; Pkg of 12

O-Ring, Buna-n, 2.109 I.D. X .139 Width

• Material - Buna-n
• I.D. x Cross Section - 2.109 x .139
• Package of 12

PN 5781
Counter Top Mounted HVE, Chrome Bezel

Counter Top Mounted HVE, Chrome Bezel

• For mounting HVE in the top of a cabinet (sterilization, lab)
• Includes colored bezel, premium HVE valve, tubing and canister

PN 2237
O-Ring, Buna-n, .676 I.D. X .070 Width, -017; Pkg of 12

O-Ring, Buna-n, .676 I.D. X .070 Width, -017

• Material - Buna-n
• I.D. x Cross Section - .676 x .070
• Package of 12

PN 5782
Counter Top Mounted HVE, Nickel Bezel

Counter Top Mounted HVE, Nickel Bezel (image shown is of chrome bezel)

• For mounting HVE in the top of a cabinet (sterilization, lab)
• Includes colored bezel, premium HVE valve, tubing and canister