PN 3085
Syringe Button w/Spring, Quick Clean

Quick-Clean Syringe Button Cartridge & Conical Spring

• For Quick-Clean Standard Style Syringes
• For Quick-Clean Euro-Style Syringes
• Fits standard style syringe

PN 7140
Check Valve w/Ball, 1/16" Barb

Check Valve w/Ball 1/16" Barb

• For use with non water retraction
• 1/16" barbs or 1/8" barbs
• Allows flow in 1 direction only

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 7321
HP Muffler and Oil Collector

HP Muffler and Oil Collector

• Can be mounted through frame for removal from outside control head
• Will handle up to four handpieces
• Minimum back pressure
• Compact size to fit inside control head
• Filter media is standard cotton swab material

PN 3066
Syringe Repair Kit, Quick-Clean

Quick Clean Syringe Repair Kit

• Fits standard style syringe

PN 6132
Foot Control Toggle Assy, Gray

Foot Control Toggle Assembly, Gray

• Wet / Dry control toggle
• Toggle Valve Assembly
• For use in the repair of DCI and wet/dry foot controls

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5983
Holder Valve, Auto HP, Normally Closed, Rear Port

Rear Port Micro Valve, Normally Closed

• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 7133
Water Relay Combo Valve Repair Kit

Water Relay & Flow Control Combo Valves, Old Style, Repair kit for 7130 Valve

• Old Style, Repair kit for 7130 Valve
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 6163
Foot Control Repair Kit, Wet/Dry

Foot Control Repair Kit, Wet/Dry

• Foot Control Repair Kit
• For use with all DCI wet/dry disc-type foot controls
• Wet / Dry Disc Type

PN 4869
Holder, Auto HP, Molded, Normally Closed, Gray

Asepsis Holder, Gray, Normally Closed

• Lt. Gray, Normally Closed
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 6165
Foot Control Repair Kit, Signal Relay

Signal Relay Repair Kit

PN 5823
Solids Collector Disposable Screen

Solids Collector Screen

• Collector Screen
• For use with DCI system 6000 and Reality units
• For use w/ 1500 series units
• Sirona / Siemens C2, C3, C4, C6
• Pelton & Crane™® S1 & S2

PN 4568
Holder, Standard, Molded, Gray

Standard Asepsis Holder, Gray

• Holder, Standard, Molded, Gray
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle
• Air operated actuator control

PN 7141
Check Valve w/Ball, 1/8" Barb

Check Valve w/Ball 1/8" Barb

• For use with non water retraction
• 1/16" or 1/8" barbs
• Allows flow in 1 direction only

PN 6166
Marus Foot Control Rebuild Kit

Marus Foot Control Rebuild Kit (Marus #85R186)

• Kit includes: PN 6011 Large Spring, PN 6018 Piston, PN 2210 Piston O-Ring (pack of 12), PN 6012 Conical Spring, PN 2207 Body O-Ring (pack of 12), PN 9010 Poppet, PN 6016 Poppet Cap, PN 6013 Toggle Spring, PN 5948 Pilot Valve, PN 9746 6 x 1/2 Pan Head Phillips Screw, PN 6014 6-32 x 1/4 Pan Head Phillips Screw
• For Repairing Older Marus Style Foot Controls 
• 55R527, 55R531, 55R535 Foot Controls
• Marus OEM # 85R186