PN 0064
10-32 Cross Connector, Female

10-32 Female Cross 4-Way

• Package of 1

PN 4430
HP Tri-Block Diaphragm

HP Tri-Block Diaphragm

• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water

PN 0166
Barb, 1/8 for Water System Manifold

Barb, 1/8 for Water System Manifold

PN 7068
Water Relay, Non-Retracting

Water Relay & Flow Control Combo Valves, non-retracting

• Water Relay, non-retracting
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 5090
Standard Autoclavable Saliva Ejectors w/Quick Disconnect

Premium Autoclavable Saliva Ejectors w/Quick Disconnect

• Single Valve w/ Quick-Disconnect w/ Push on Tip
• Single piece anodized aluminum body
• Easy removal lever & spool valve assembly
• Quick disconnect – 360° swivel
• Includes brush for cleaning

PN 4561
Holder, Auto HP, Molded, Normally Closed, White

Asepsis Holders

• Holder, Auto HP, Molded, Normally Closed, White
• Normally Closed
• Air operated actuator control.
• Resists chemical discoloration.
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 7203
Mini Regulator, 10-32 Input, Non-Relieving

Mini Regulator

• 10-32 Input, Non-Relieving
• 150 PSI maximum
• Piston type
• Non-relieving
• Mounting hardware 15/32-32 thread with nut
• Water or air
• Turn clockwise to increase pressure

PN 0078
1/8" In-line Barb; Pkg of 10

1/8" Plated In-line Barb

• Package of 10 

PN 0071
1/8" Clamp Sleeve; Pkg of 10

1/8" Clamp Sleeve

• For use with 1/8" O.D. tubing
• Package of 10

PN 2230
O-Ring, Buna-n, .042 X .050 Width, -002; Pkg of 12

O-Ring 11-002, Buna-n, .042 X .050 Width

• Material - Buna-n
• I.D. x Cross Section - .042 x .050
• Package of 12
• (A-dec® #030.002.00)

PN 6132
Foot Control Toggle Assy, Gray

Foot Control Toggle Assembly, Gray

• Wet / Dry control toggle
• Toggle Valve Assembly
• For use in the repair of DCI and wet/dry foot controls

PN 5872
Vacuum Canister Side Port w/Bracket

Vacuum Canister, Bottom & Side Mount

• Side Port
• Available in either side or bottom port
• Solids collector w/ removable screen
• Accepts 2 HVE & 1 SE
• Uses 2 1/8" screens 5817, 5889, 5887
• Mounts using four 6-32 screws on bottom surface (included)
• 5872 & 5873 include mounting bracket 5877
• 5/8" O.D. Drain

PN 739
Vacuum Tubing, 5/8" I.D., Asepsis Sterling

Vacuum Tubing, 5/8" I.D., Asepsis Sterling (per foot)

PN 0079
1/16" x 1/8" In-line Barb ; Pkg of 10

1/16" x 1/8" In-line Barb

• Package of 10

PN 0840
1/4" MPT x FPT Street Elbow

1/4" MPT x FPT Street Elbow

PN 5960
Holder, Auto HP, w/Lockout Toggle, Gray

Universal Holders

• Holder, Auto HP, w/Lockout Toggle, Gray
• With Lockout Toggle
• Easy clean sytle
• Air operated actuator control
• Normally closed
• Durable plastic holder aqnd machined aluminum-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 8683
Pelton & Crane Light Bulb, 24 VAC 150 Watt

Replacement Bulbs

• LF I & LF + Bulb, (P&C #3321879)
• 25 Volt AC / 150 watt

PN 8636
Pelton & Crane Light Socket, LFI, LFII, LFIII

Pelton & Crane® LF I, LF II & LF III Light Socket (P&C #3336992)

• Replacement lamp socket
• Improved contactor
• Stronger spring
• Improved wire connection

PN 7084
Air Electric Switch, 10 PSI, Normally Open

Air Electric Switch, 10 PSI, Normally Open, to fit A-dec® Handpiece Control (A-dec® #044.158.00) 

• Activated at 10 PSI or 25 PSI
• On/off control of up to 120Volt, 1 amp
• 125 PSI max
• Normally open or closed
• 0-60 PSI reading
• 1/2" H x 1 3/4" W
• For air only
• Vibration & shock resistant

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 8013
Tray, Stainless Steel, 9-3/4" x 13-1/2"

Stainless Steel Tray (B Size)

• Stainless Steel Tray (B Size)
• 9 3/4 X 13 1/2" (B Size)

PN 5088
Standard Autoclavable Saliva Ejectors w/Quick Disconnect and Threaded Tip

Premium Autoclavable Saliva Ejectors w/Quick Disconnect and Threaded Tip

• Single Valve w/ Quick-Disconnect w/ Threaded Tip
• Single piece anodized aluminum body
• Easy removal lever & spool valve assembly
• Quick disconnect – 360° swivel
• Includes brush for cleaning

PN 715
Vacuum Tubing, 3/4" I.D., Corrugated Sterling

Vacuum Tubing, 3/4" I.D., Corrugated Sterling

• Priced per foot

PN 0187
10-32 x 1/16", Barb; Pkg of 100

1/16" Barb Only

• For 1/8" O.D. tubing
• Package of 100
• For 1/8" O.D. tubing

PN 7205
Mini Regulator, 10-32 Input, Self-Relieving

Mini Regulator

• 10-32 Input, Self-Relieving
• 150 PSI maximum
• Piston type
• Self-relieving
• Mounting hardware 15/32-32 thread with nut
• Water or Air
• Turn clockwise to increase pressure

PN 2297
O-Ring, Buna-n, .799 I.D. X .103 Width; Pkg of 12

O-Ring, Buna-n, .799 I.D. X .103 Width

• Easy installation requires no tools
• Saves time in changing bottles
• Self-locking feature ensures proper positioning when pressurized
• Automatic pressure release when removing bottle
• Patented design exclusive to DCI

PN 7012
Toggle Valve, On/Off, 2-Way, Gray

Toggle Valve On/Off Hex Body, 2-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 5947
Holder Valve, Auto HP, Normally Open, Side Port

Holder Valve, Auto HP, Normally Open, Side Port

• Normally open is used for positive air signal
• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 5823
Solids Collector Disposable Screen

Solids Collector Screen

• Collector Screen
• For use with DCI system 6000 and Reality units
• For use w/ 1500 series units
• Sirona / Siemens C2, C3, C4, C6
• Pelton & Crane™® S1 & S2

PN 4433
HP Quad-Block Diaphragm

HP Quad-Block Diaphragm

• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water

PN 8126
CAP BOTTLE w/ PS-22 SEAL 28mm x 19.0mm

CAP BOTTLE w/ PS-22 SEAL 28mm x 19.0mm• Heavy wall construction, safely operated at normal water system pressure • High Density Polyethylene (HDPE) is compatible w/ coolant liquids used in dentistry • Can be used on most Dental Systems (w/ the Universal Manifold 8134 or 8119) • Bottle dimensions: (750-ml, 3" W x 9 1/2" H)(1-liter, 3 1/2"W x 11" H)(2-liter, 4" W x 13 7/8" H) • Standard 28 mm threads • Washer now included!

PN 2254
O-Ring, Viton, .426 I.D. X .070 Width, -013; Pkg of 12

O-Ring, Viton, .426 I.D. X .070 Width, -013

• Material - Viton
• I.D. x Cross Section - .426 x .070
• Package of 12

PN 4869
Holder, Auto HP, Molded, Normally Closed, Gray

Asepsis Holder, Gray, Normally Closed

• Lt. Gray, Normally Closed
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8114
Power Switch, 125 Vac 15 Amp, to fit A-dec( R ) 6300, Pelton & Crane LF I & LF II

Pelton & Crane® LF I Switch

• Pelton & Crane® LF I Switch, (P&C #007096 & 3321853)
• Power Switch

• SPST switch
• 125 Volt AC / 15 amp
• 6" leads
• Used by A-dec® and P&C

A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 7133
Water Relay Combo Valve Repair Kit

Water Relay & Flow Control Combo Valves, Old Style, Repair kit for 7130 Valve

• Old Style, Repair kit for 7130 Valve
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 8222
Non-Slip Pad, 6" x 11.5"

Tray

• Non-Slip Pad, 6" x 11.5"
• Non Skid Pad

PN 4566
Holder, Standard, Molded, White

Asepsis Holders

• Holder, Standard, Molded, White
• Asepsis Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 7090
Shuttle Valve, 1/8"

Shuttle Valve, 1/8"

• For routing two different flows through one output
• For 1/8" tubing

PN 9188
Single Shut Off Valve Assembly & Filter, Water

Water Single Shut-Off Valve Assembly & Filter

• Water Single Shut-Off Valve Assembly & Filter
• For water
• 3/8" compression tube connection
• Includes 40 micron filter 

PN 7220
Norgren Regulator Only, Non-Relieving

Norgren Regulator Only, Non-Relieving

• Regulator (7220)
• For use with air or water
• In-line filter (7250)
• Round gauge (7260)
• Mounting bracket (7223)
• 1/4" poly x 1/8" MPT connector (0053)
• 1/8" MPT close nipple (0094)
• For use w/ air or water
• Maximum 125 PSI
• Turn clockwise to increase pressure

PN 2946
Caster, Soft Wheel For Hard Floors, Gray

Cart & Stool Casters  

• Soft wheel for hard floor caster, Gray

• Replacement for most dental stools
• Smooth rolling on tile and hardwood floors

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 7270
Rectangular Air Gauge

Replacement A-dec® Rectangular Pressure Gauge 0-60 PSI (A-dec® #026.083.01)

• 0-60 PSI reading
• For air only
• 1/2" H x 1-3/4" W
• Vibration & shock resistant

   

PN 7247
Filter Element, 40 Micron

Filter Element, 40 Micron

• (A-dec® #24.0234.00)
• Non-relieving regulator, piston type
• 150 PSI maximum for regulator
• 40 micron filter element
• Turn clockwise to increase pressure
• PN 7311 rebuild kit for PN 7212
• Integrated 3/8" compression tube to adapt to 7100 & 7099 manual shut-off valve
• PN 7212 includes 10-32 x 1/8" barb & washer

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5970
Holder Assy, Vacuum, Gray

Universal Holder

• Holder Assy, Vacuum, Gray
• HVE Holder
• Holds vacuum valves from base
• For 1/2" bar-mounting

• Adjustable tilt angle

PN 719
Vacuum Tubing, 1-3/4" I.D., Corrugated Sterling

Vacuum Tubing, 1-3/4" I.D., Corrugated Sterling

• Priced per foot

PN 7248
Filter Element, 40 Micron; Pkg of 6

Filter Element, 40 Micron

• 1/8" FPT ports
• 40 micron replaceable element
• Kit Includes: housing, O-Rings, 40 micron filter element
• Package of 6

PN 0100
1/8" MPT Adapters x 3/8" Compression Tube

1/8" MPT Adapters x 3/8" Compression Tube

PN 4421
Automatic HP Tri-Block

Tri-Block w/ Std. Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"