PN 7140
Check Valve w/Ball, 1/16" Barb

Check Valve w/Ball 1/16" Barb

• For use with non water retraction
• 1/16" barbs or 1/8" barbs
• Allows flow in 1 direction only

PN 7139
Water Relay, Combo Valve w/Gray Knob

Water Relay w/ Flow Control Combo Valves

• Water Relay w/ Flow Control
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 7350
Water Relay, Retracting, Standard

Water Relay, Retracting, Standard

• Activates at 20 PSI

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 7052
Needle Valve w/Knob, Gray

Needle Valve W/Knob, Gray

• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread with nut
• Includes 1/16" hex allen wrench

PN 7001
Toggle Routing Valve, 2-Way, Gray

Toggle Routing “Selector” Valve Hex Body, 2-Way, Gray

• Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
• Panel-mounting 15/32-32 thread with nut
• For air or water

PN 7016
Toggle Valve, On/Off, 3-Way, Gray

Toggle Valve Hex Body, On/Off, 3-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 7068
Water Relay, Non-Retracting

Water Relay & Flow Control Combo Valves, non-retracting

• Water Relay, non-retracting
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 7203
Mini Regulator, 10-32 Input, Non-Relieving

Mini Regulator

• 10-32 Input, Non-Relieving
• 150 PSI maximum
• Piston type
• Non-relieving
• Mounting hardware 15/32-32 thread with nut
• Water or air
• Turn clockwise to increase pressure

PN 7836
Toggle Cartridge Routing Valve, On/Off, Side & Rear Ported, Gray

Toggle Cartridge Routing Valve, On/Off, Side & Rear Ported, Gray

• On/Off, Side & Rear Ported
• Red cartridge body color
• Removable cartridge insert
• Will replace most OEM valves
• Color coded cartridge for easy identification
• Increased flow
• Quick and simple 60 degree turn to remove or insert

PN 7080
Air Electric Switch, 25 PSI, Normally Open

Air Electric Switch, 25 PSI, Normally Open (A-dec® #044.181.00) 

• Activated at 25 PSI, 5 A
• On/off control of up to 120V, 5 amp
• 15/32-32 thread with nut
• 125 PSI max

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 7212
Integrated Master Shut-Off Valve w/Regulator & Filter

Integrated Master Shut-Off Valve w/Regulator & FilterIntegrated Shut-Off Valve

• Non-relieving regulator, piston type
• 150 PSI maximum for regulator
• 40 micron filter element
• Turn clockwise to increase pressure
• PN 7311 rebuild kit for PN 7212
• Integrated 3/8" compression tube to adapt to 7100 & 7099 manual shut-off valve
• PN 7212 includes 10-32 x 1/8" barb & washer

PN 7084
Air Electric Switch, 10 PSI, Normally Open

Air Electric Switch, 10 PSI, Normally Open, to fit A-dec® Handpiece Control (A-dec® #044.158.00) 

• Activated at 10 PSI or 25 PSI
• On/off control of up to 120Volt, 1 amp
• 125 PSI max
• Normally open or closed
• 0-60 PSI reading
• 1/2" H x 1 3/4" W
• For air only
• Vibration & shock resistant

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 7205
Mini Regulator, 10-32 Input, Self-Relieving

Mini Regulator

• 10-32 Input, Self-Relieving
• 150 PSI maximum
• Piston type
• Self-relieving
• Mounting hardware 15/32-32 thread with nut
• Water or Air
• Turn clockwise to increase pressure

PN 3021
Syringe Flow Control Block

Syringe Block

• For use on DCI 4102 & other manual handpiece control systems
• Includes all barb fittings
• Handpiece pressure adjustment