PN 7140
Check Valve w/Ball, 1/16" Barb

Check Valve w/Ball 1/16"

• For use with non water retraction
• 1/16" barbs
• Allows flow in 1 direction only

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Valve, Auto HP, Normally Closed, Side Port

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 7016
Toggle Valve, On/Off, 3-Way, Gray

Toggle Valve, On/Off, 3-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only

PN 7247
Filter Element, 40 Micron

Filter Element, 40 Micron (A-dec® #24.0234.00)

• Fits 7246
• 40 Micron replaceable element
• 1/8" FPT ports
• 11/16" diameter x 3/4" height

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 7187
Pilot Actuated Needle Valve, 2-Way, Normally Closed

Pilot Actuated Needle Valve, 2-Way, Normally Closed

• 35 PSI Activation Pressure
• Midmark OEM # 029-3411-00 

PN 7087
Air Electric Switch, 25 PSI, Normally Closed

Air Electric Switch, 25 PSI, Normally Closed

• Activated at 25 PSI
• On/off control of up to 120V, 5 amp
• 15/32-32 thread with nut
• 125 PSI max

PN 7280
Air On/Off Indicator, Red

Air On/Off Indicator - Red (A-dec® # 24.0100.03) 

• 10-32 Port with barbs for 1/16" tubing
• 25-120 PSI
• Panel-mount

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 0168
Duck Bill Barb

Duck Bill Barb

• Provides handpiece water line suck back control
• High flow rate is 80% of standard barb
• Barb has obvious appearance difference from standard
• Will fit any port where standard barb now used
• Can be used on handpiece or syringe water lines

PN 7185
Knob Only, Valve Knob, Blue

Knob Only, Valve Knob, Blue

• Smooth Style Knob
• 1/4" Brass Shaft
• Midmark OEM # 053-1165.01

 

PN 7186
Knob Only, Valve Knob, Surf

Knob Only, Valve Knob, Surf

PN 2816
Relief Valve, Midmark/Ritter M9 & M11, Pelton & Crane OCM & OCR

Relief Valve, Midmark/Ritter M9 & M11, Pelton & Crane OCM & OCR(Midmark #002-0359-00)(Pelton & Crane #004146) 

• 1/2" NPT
• Brass pull ring for testing
• Rated for 35 PSI

PN 2815
Midmark/Ritter Relief Valve, M7

Midmark/Ritter Relief Valve, M7 (Midmark #H98089 & 11683)

• Original OEM replacement
• 1/8" NPT
• 38 PSI

PN 3112
Syringe Water Heater, Manual On/Off, 220/240 VAC

Syringe Water Heater, Manual On/Off, 220/240 VAC

• Compact reservoir
• Manual on/off control
• 4" high X 2" diameter
• Recommended mounting in upright position
• Includes 10-32 barbs for 1/8" O.D. tubing, sleeves and mounting hardware
• Adjustable temperature control, preset at 105 degrees F
• Power "on" indicator light
• For use with DCI circulating syringes only