PN 5754
Saliva Ejector Tip Push-on Autoclavable, Gray

Push On Tip to fit A-dec® Saliva Ejectors, Gray Tip, (A-dec® #12.0183.01)

• Push-on Autoclavable, Gray
• Push-on or screw-on
• Tips are autoclavable
• Latex-free

PN 3430
Syringe, Standard, Quick-Clean, Less Tubing & Kit

Syringe, Standard, Quick Clean, Less Tubing & Kit

• Smooth contours for quick, thorough cleaning
• Quick-Change® tip disconnect
• Uses standard autoclavable tips or disposable tips
• Asepsis tubing standard
• Includes service kit when purchased w/ tubing

PN 742
Vacuum Tubing, 1/2" I.D., Smooth Asepsis Sterling

Vacuum Tubing, 1/2" I.D., Smooth Asepsis Sterling

• Priced per foot
• Smooth, inside and outside
• Geometric cross-section resists crimping or collapsing
• Extruded vinyl
• Compatible with cleaning and disinfecting solutions
• Fits standard HVE valves

PN 8164
2 Liter Bottle w/Cap & Pick-Up Tube

2 Liter Bottle w/Cap & Pick-Up Tube

• Heavy wall construction, safely operated at normal water system pressure
• High Density Polyethylene (HDPE) is compatible w/ coolant liquids used in dentistry
• Can be used on most Dental Systems (w/ the Universal Manifold 8134 or 8119)
• Bottle dimensions:
  • (750-ml, 3" W x 9 1/2" H)
  • (1-liter, 3 1/2"W x 11" H)
  • (2-liter, 4" W x 13 7/8" H)
• Standard 28 mm threads
• Washer now included!

PN 5670
Economy Autoclavable Saliva Ejector Lever

Economy Autoclavable Valves

• Replacement Lever
• Anodized aluminum body
• Quick disconnect – 360° swivel
• Smooth plastic lever action
• Includes brush for cleaning

PN 8136
Washer for Water Bottle Cap

Washer for Water Bottle Cap• .720 ID x 1.063 OD

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 8128
750 ml Plastic Bottle w/Cap & Pick-Up Tube

750 ml Plastic Bottle w/Cap & Pick-Up Tube

•  Heavy wall construction, safely operated at normal water system pressure
•  High Density Polyethylene (HDPE) is compatible w/ coolant liquids used in dentistry
•  Can be used on most Dental Systems (w/ the Universal Manifold 8134 or 8119)
•  Bottle dimensions:
• (750-ml, 3" W x 9 1/2" H)
• (1-liter, 3 1/2"W x 11" H)
• (2-liter, 4" W x 13 7/8" H)
•  Standard 28 mm threads
•  Washer now included!

PN 0014
1/4" Poly Q.D. w/ Shut-off, Male 1/4"

1/4" Poly Male Insert Q.D. w/ Shut-off

• 1/4" Q.D. w/ shut-off
• For use with water or air

PN 3060
Syringe Tip, Autoclavable, Quick-Change, Long

Syringe Tip, Autoclavable, Quick-Change, Long

• Tips are standard in the Quick-Change style DCI syringe
• The autoclavable syringe tips are interchangeable and are used in syringes with the old style nut retainer and in the DCI Quick-Change tip disconnect. The DCI syringe tips offer more air outlet ports than the A-dec® tip.

A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 8941
Converter & Adapter, Water Bottle Quick Switch Kit

Converter & Adapter, Water Bottle  Quick Switch Kit

• Easy installation requires no tools 
• Saves time in changing bottles 
• Self-locking feature ensures proper positioning when pressurized 
• Automatic pressure release when removing bottle 
• Patented design exclusive to DCI

PN 0077
1/16" In-line Barb; Pkg of 10

1/16" Plated In-Line Metal Barb

• Package of 10

PN 7001
Toggle Routing Valve, 2-Way, Gray

Toggle Routing “Selector” Valve Hex Body, 2-Way, Gray

• Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
• Panel-mounting 15/32-32 thread with nut
• For air or water

PN 3066
Syringe Repair Kit, Quick-Clean

Quick Clean Syringe Repair Kit

• Fits standard style syringe

PN 4430
HP Tri-Block Diaphragm

HP Tri-Block Diaphragm

• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water

PN 5965
Holder Assy, Standard, Gray

Universal Holder

• Holder Assy, Standard, Gray
• Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Adjustable tilt angle
• Durable plastic holder and machined aluminum-mount
• For 1/2" bar-mounting
• Used with vacuum valves with tip extension

PN 5090
Standard Autoclavable Saliva Ejectors w/Quick Disconnect

Premium Autoclavable Saliva Ejectors w/Quick Disconnect

• Single Valve w/ Quick-Disconnect w/ Push on Tip
• Single piece anodized aluminum body
• Easy removal lever & spool valve assembly
• Quick disconnect – 360° swivel
• Includes brush for cleaning

PN 5070
Standard Autoclavable Extended Vacuum Valves w/Quick Disconnect

Premium Autoclavable Extended Vacuum Valves w/Quick Disconnect

• Single Valve w/ Quick-Disconnect
• Single piece anodized aluminum body
• Easy removal lever and spool valve assembly
• Quick disconnect - 360 degree swivel
• Includes brush for cleaning

PN 4561
Holder, Auto HP, Molded, Normally Closed, White

Asepsis Holders

• Holder, Auto HP, Molded, Normally Closed, White
• Normally Closed
• Air operated actuator control.
• Resists chemical discoloration.
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 7203
Mini Regulator, 10-32 Input, Non-Relieving

Mini Regulator

• 10-32 Input, Non-Relieving
• 150 PSI maximum
• Piston type
• Non-relieving
• Mounting hardware 15/32-32 thread with nut
• Water or air
• Turn clockwise to increase pressure

PN 6132
Foot Control Toggle Assy, Gray

Foot Control Toggle Assembly, Gray

• Wet / Dry control toggle
• Toggle Valve Assembly
• For use in the repair of DCI and wet/dry foot controls

PN 0082
1/16" Barb Tee, Plastic; Pkg of 10

1/16" Barb Tee White Plastic

• For use with 1/8" O.D. tubing
• Package of 10

PN 3470
Syringe, Valve Core, Quick-Clean, Less Tubing & Kit

Quick-Clean® Standard Syringe

• Smooth contours for quick, thorough cleaning
• Quick-Change® tip disconnect
• Uses standard autoclavable tips or disposable tips
• Asepsis tubing standard
• Includes service kit when purchased w/ tubing

PN 7212
Integrated Master Shut-Off Valve w/Regulator & Filter

Integrated Master Shut-Off Valve w/Regulator & FilterIntegrated Shut-Off Valve

• Non-relieving regulator, piston type
• 150 PSI maximum for regulator
• 40 micron filter element
• Turn clockwise to increase pressure
• PN 7311 rebuild kit for PN 7212
• Integrated 3/8" compression tube to adapt to 7100 & 7099 manual shut-off valve
• PN 7212 includes 10-32 x 1/8" barb & washer

PN 0864
3/8" Poly x 3/8" Compression Tube

3/8" Poly x 3/8" Compression Tube

PN 8013
Tray, Stainless Steel, 9-3/4" x 13-1/2"

Stainless Steel Tray (B Size)

• Stainless Steel Tray (B Size)
• 9 3/4 X 13 1/2" (B Size)

PN 5088
Standard Autoclavable Saliva Ejectors w/Quick Disconnect and Threaded Tip

Premium Autoclavable Saliva Ejectors w/Quick Disconnect and Threaded Tip

• Single Valve w/ Quick-Disconnect w/ Threaded Tip
• Single piece anodized aluminum body
• Easy removal lever & spool valve assembly
• Quick disconnect – 360° swivel
• Includes brush for cleaning

PN 8688
Light Bulb, 12 VAC 55 Watt

Bulb to fit A-dec® Performer®

• Performer® Bulb, (A-dec® #041.513.00)
• H-3 Bulb Type, 12 Volt AC/55 watt

• Used by A-dec® Performer®
• Used by Ampco Contender, Fiad
• Used by Healthco
• Used by SDS Fantastic Belmont
• Used by Celux
• Used by Chayes Virginia
• Used by DCI Equipment Pro 70
• Used by Marus Pro 72
• TPC L800
• SDS 1355

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® and Performer® are a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5983
Holder Valve, Auto HP, Normally Closed, Rear Port

Rear Port Micro Valve, Normally Closed

• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 7012
Toggle Valve, On/Off, 2-Way, Gray

Toggle Valve On/Off Hex Body, 2-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 5840
Dry Oral Cup

Autoclavable Dry Oral Cup

• Dry Oral Cup
• Used with central vacuum valves
• White autoclavable plastic
• 4" diameter x 4-1/2" high

PN 4433
HP Quad-Block Diaphragm

HP Quad-Block Diaphragm

• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water

PN 8144
Economy Self-Contained Standard Water System w/2 Liter Bottle

Economy Self-Contained Standard Water System w/2 Liter Bottle

•  Deluxe models have a selector toggle allowing you to switch between city & bottled water
•  750 ml & 2 liter heavy duty bottles
•  Standard 28mm thread or patented quick-switch system for water bottle
•  Gauge 7260 shows bottle pressure
•  Bracket mounts to any flat vertical surface
•  Optional post-mount available
•  On/off toggle releases bottle pressure

PN 8126
CAP BOTTLE w/ PS-22 SEAL 28mm x 19.0mm

CAP BOTTLE w/ PS-22 SEAL 28mm x 19.0mm• Heavy wall construction, safely operated at normal water system pressure • High Density Polyethylene (HDPE) is compatible w/ coolant liquids used in dentistry • Can be used on most Dental Systems (w/ the Universal Manifold 8134 or 8119) • Bottle dimensions: (750-ml, 3" W x 9 1/2" H)(1-liter, 3 1/2"W x 11" H)(2-liter, 4" W x 13 7/8" H) • Standard 28 mm threads • Washer now included!

PN 4869
Holder, Auto HP, Molded, Normally Closed, Gray

Asepsis Holder, Gray, Normally Closed

• Lt. Gray, Normally Closed
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 7133
Water Relay Combo Valve Repair Kit

Water Relay & Flow Control Combo Valves, Old Style, Repair kit for 7130 Valve

• Old Style, Repair kit for 7130 Valve
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 8684
DCI Equipment Light Bulb, 24 VAC 100 Watt

Replacement Bulbs

• 24 Volt AC / 100 Watt Bulb
• Fits DCI Equipment light/ Midmark 355 (002-0640-00)

PN 4566
Holder, Standard, Molded, White

Asepsis Holders

• Holder, Standard, Molded, White
• Asepsis Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 9188
Single Shut Off Valve Assembly & Filter, Water

Water Single Shut-Off Valve Assembly & Filter

• Water Single Shut-Off Valve Assembly & Filter
• For water
• 3/8" compression tube connection
• Includes 40 micron filter 

PN 7090
Shuttle Valve, 1/8"

Shuttle Valve, 1/8"

• For routing two different flows through one output
• For 1/8" tubing

PN 7270
Rectangular Air Gauge

Replacement A-dec® Rectangular Pressure Gauge 0-60 PSI (A-dec® #026.083.01)

• 0-60 PSI reading
• For air only
• 1/2" H x 1-3/4" W
• Vibration & shock resistant

   

PN 7247
Filter Element, 40 Micron

Filter Element, 40 Micron

• (A-dec® #24.0234.00)
• Non-relieving regulator, piston type
• 150 PSI maximum for regulator
• 40 micron filter element
• Turn clockwise to increase pressure
• PN 7311 rebuild kit for PN 7212
• Integrated 3/8" compression tube to adapt to 7100 & 7099 manual shut-off valve
• PN 7212 includes 10-32 x 1/8" barb & washer

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 4421
Automatic HP Tri-Block

Tri-Block w/ Std. Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"

PN 7321
HP Muffler and Oil Collector

HP Muffler and Oil Collector

• Can be mounted through frame for removal from outside control head
• Will handle up to four handpieces
• Minimum back pressure
• Compact size to fit inside control head
• Filter media is standard cotton swab material

PN 5851
Cuspidor Drain Kit

Vacuum Drain Assembly Kit

• Cuspidor Drain Kit
• Select cuspidor drain kit
• Eliminates the need for conventional plumbing
• Allows installation where a gravity drain is not available or practical
• Includes flush toggle for remote operation

PN 7021
Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 0083
1/8" Barb Tee, Plastic; Pkg of 10

1/8" Barb Tee White Plastic

• For use with 1/4" O.D. tubing
• Package of 10