All Replacement Parts by Marus in Pelton and Crane/Marus Replacement Parts

PN 7140
Check Valve w/Ball, 1/16" Barb

Check Valve w/Ball 1/16" Barb

• For use with non water retraction
• 1/16" barbs or 1/8" barbs
• Allows flow in 1 direction only

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 3066
Syringe Repair Kit, Quick-Clean

Quick Clean Syringe Repair Kit

• Fits standard style syringe

PN 6132
Foot Control Toggle Assy, Gray

Foot Control Toggle Assembly, Gray

• Wet / Dry control toggle
• Toggle Valve Assembly
• For use in the repair of DCI and wet/dry foot controls

PN 5983
Holder Valve, Auto HP, Normally Closed, Rear Port

Rear Port Micro Valve, Normally Closed

• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5823
Solids Collector Disposable Screen

Solids Collector Screen

• Collector Screen
• For use with DCI system 6000 and Reality units
• For use w/ 1500 series units
• Sirona / Siemens C2, C3, C4, C6
• Pelton & Crane™® S1 & S2

PN 7133
Water Relay Combo Valve Repair Kit

Water Relay & Flow Control Combo Valves, Old Style, Repair kit for 7130 Valve

• Old Style, Repair kit for 7130 Valve
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 7321
HP Muffler and Oil Collector

HP Muffler and Oil Collector

• Can be mounted through frame for removal from outside control head
• Will handle up to four handpieces
• Minimum back pressure
• Compact size to fit inside control head
• Filter media is standard cotton swab material

PN 4568
Holder, Standard, Molded, Gray

Standard Asepsis Holder, Gray

• Holder, Standard, Molded, Gray
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle
• Air operated actuator control

PN 2207
O-Ring, Buna-n, .426 I.D. X .070 Width, -013; Pkg of 12

Body O-Ring, Buna-n, .426 I.D. X .070 Width, -013

• Material - Buna-n
• I.D. x Cross Section - .426 x .070
• Package of 12

PN 6166
Marus Foot Control Rebuild Kit

Marus Foot Control Rebuild Kit (Marus #85R186)

• Kit includes: PN 6011 Large Spring, PN 6018 Piston, PN 2210 Piston O-Ring (pack of 12), PN 6012 Conical Spring, PN 2207 Body O-Ring (pack of 12), PN 9010 Poppet, PN 6016 Poppet Cap, PN 6013 Toggle Spring, PN 5948 Pilot Valve, PN 9746 6 x 1/2 Pan Head Phillips Screw, PN 6014 6-32 x 1/4 Pan Head Phillips Screw
• For Repairing Older Marus Style Foot Controls 
• 55R527, 55R531, 55R535 Foot Controls
• Marus OEM # 85R186 

PN 9134
Time Delay, Relay Assy

Time Delay, Relay Assy

• Works on Marus Max Star Cuspidor
• Controls length of time bowl or cup fill is activated
• 1/4" Poly Inlet & Outlet