Replacement Pelton & Crane Handpiece Acc. and Fiber Optics

All Replacement Parts by Pelton & Crane in Handpiece Acc. and Fiber Optics

8 Result Found

Results per page:  16 | 24 | 48 | ALL | 
  • PN 4430
    HP Tri-Block Diaphragm

    HP Tri-Block Diaphragm

    • Consistent flow control for handpiece pressure adjustments
    • Higher output due to improved airflow
    • Longer lasting diaphragm
    • No internal cross-over of air or water

    Price:

  • PN 7321
    HP Muffler and Oil Collector

    HP Muffler and Oil Collector

    • Can be mounted through frame for removal from outside control head
    • Will handle up to four handpieces
    • Minimum back pressure
    • Compact size to fit inside control head
    • Filter media is standard cotton swab material

    Price:

  • PN 2254
    O-Ring, Viton, .426 I.D. X .070 Width, -013; Pkg of 12

    O-Ring, Viton, .426 I.D. X .070 Width, -013

    • Material - Viton
    • I.D. x Cross Section - .426 x .070
    • Package of 12

    Price:

  • PN 4421
    Automatic HP Tri-Block

    Automatic HP Tri-Block

    • Works with normally closed automatic handpiece holders
    • Consistent flow control for handpiece pressure adjustments
    • Higher output due to improved airflow
    • Longer lasting diaphragm
    • No internal cross-over of air or water
    • Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"

    Price:

  • PN 4433
    HP Quad-Block Diaphragm

    HP Quad-Block Diaphragm

      Price:

    • PN 4425
      Automatic HP Quad-Block

      HP Quad-Block w/Std. Adjustment Screws

      • Works with normally closed automatic handpiece holders
      • Consistent flow control for handpiece pressure adjustments
      • Higher output due to improved airflow
      • Longer lasting diaphragm
      • No internal cross-over of air or water
      • Block dimensions: 3 1/8" x 1 1/2" x 1"

      Price:

    • PN 8814
      Terminal Nut, Long

      Terminal Nut, Long

      • Metal construction, threaded
      • For use on ISO fiber optic tubing with lamp module #8813
      • Converts ISO-C to ISO style tubing

      Price:

    • PN 4427
      Automatic HP Quin-Block

      Quin-Block w/ Std. Adjustment Screws

      • Works with normally automatic handpiece holders
      • Consistent flow control for handpiece pressure adjustments
      • Individual drive air adjustment screws
      • Higher output due to improved airflow
      • Longer lasting diaphragm
      • No internal cross-over of air or water
      • Block dimensions: 3 3/4" x 1 1/2" x 1"

      Price:

    Results per page:  16 | 24 | 48 | ALL |