PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Valve, Auto HP, Normally Closed, Side Port

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 5965
Holder Assy, Standard, Gray

Holder Assy, Standard, Gray

• Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Adjustable tilt angle
• Durable plastic holder and machined aluminum-mount
• For 1/2" bar-mounting
• Used with vacuum valves with tip extension

PN 5960
Holder, Auto HP, w/Lockout Toggle, Gray

Holder, Auto HP, w/Lockout Toggle, Gray

• With Lockout Toggle
• Easy clean sytle
• Air operated actuator control
• Normally closed
• Durable plastic holder aqnd machined aluminum-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 5947
Holder Valve, Auto HP, Normally Open, Side Port

Holder Valve, Auto HP, Normally Open, Side Port

• Normally open is used for positive air signal

PN 8013
Tray, Stainless Steel, 9-3/4" x 13-1/2"

Tray, Stainless Steel, 9-34" x 13-1/2"

• Stainless Steel Tray (B Size)
• 9 3/4 X 13 1/2" (B Size)

PN 4592
Holder, Auto HP, w/o Lockout Toggle, Gray

Holder, Auto HP,  w/o Lockout Toggle, Gray

• Without Lockout Toggle
• Easy clean style
• Air operated actuator control
• Normally closed
• Durable plastic holder and machined alumimun-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 8222
Non-Slip Pad, 6" x 11.5"

Non-Slip Pad, 6" x 11.5"

• Non Skid Pad

PN 5962
Holder Replacement, Standard, Gray

Holder Replacement, Standard, Gray

• Standard Holder
• Replacement holders for bracket assemblies
• Durable plastic construction

PN 5970
Holder Assy, Vacuum, Gray

Holder Assy, Vacuum, Gray

• HVE Holder
• Holds vacuum valves from base
• For 1/2" bar-mounting
• Durable plastic holder and machined aluminum-mount
• Adjustabale tilt angle

PN 8410
Storage Tub, Includes Hinge, Dividers, & Lid

Storage Tub, Includes Hinge, Dividers, & Lid (A-dec® #16.0562.00) Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5910
Holder, Standard, Gray

Holder, Standard, Gray

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• Durable plastic construction
• For HP, SE, HVE with Tip

PN 8010
Caster, Cart, Gray

Caster, Cart, Gray

• Hard wheel caster, designed for all carts
• Gray
• Smooth rolling, dual wheel
• Caster 2" diameter, pin 7/16" diameter x 1" long
• Non-marking

PN 5969
Holder, Electric Auto, Normally Closed, Gray

Holder, Electric Auto, Normally Closed, Gray

• Normally Closed
• Holder assembly with low voltage switch for direct activation of electrical accessory
• On/off lockout toggle
• 125 Volts AC / DC 5 amps

PN 5882
Holder Bar, 4", Gray

Holder Bar, 4", Gray

• Holder Bar, Dual 4"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 5881
Holder Bar, 2", Gray

Holder Bar, 2", Gray

• Holder Bar, Single 2"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted