PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Valve, Auto HP, Normally Closed, Side Port

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 4561
Holder, Auto HP, Molded, Normally Closed, White

Holder, Auto HP, Molded, Normally Closed, White

• Normally Closed
• Air operated actuator control.
• Resists chemical discoloration.
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5947
Holder Valve, Auto HP, Normally Open, Side Port

Holder Valve, Auto HP, Normally Open, Side Port

• Normally open is used for positive air signal

PN 5960
Holder, Auto HP, w/Lockout Toggle, Gray

Holder, Auto HP, w/Lockout Toggle, Gray

• With Lockout Toggle
• Easy clean sytle
• Air operated actuator control
• Normally closed
• Durable plastic holder aqnd machined aluminum-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 8013
Tray, Stainless Steel, 9-3/4" x 13-1/2"

Tray, Stainless Steel, 9-34" x 13-1/2"

• Stainless Steel Tray (B Size)
• 9 3/4 X 13 1/2" (B Size)

PN 4566
Holder, Standard, Molded, White

Holder, Standard, Molded, White

• Asepsis Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8222
Non-Slip Pad, 6" x 11.5"

Non-Slip Pad, 6" x 11.5"

• Non Skid Pad

PN 5970
Holder Assy, Vacuum, Gray

Holder Assy, Vacuum, Gray

• HVE Holder
• Holds vacuum valves from base
• For 1/2" bar-mounting
• Durable plastic holder and machined aluminum-mount
• Adjustabale tilt angle

PN 4869
Holder, Auto HP, Molded, Normally Closed, Gray

Asepsis Holder, Lt. Gray, Normally Closed

• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5989
Holder Valve, Auto HP, Normally Open, Rear Port

Holder Valve, Auto HP, Normally Open, Rear Port

PN 8410
Storage Tub, Includes Hinge, Dividers, & Lid

Storage Tub, Includes Hinge, Dividers, & Lid (A-dec® #16.0562.00) Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 8010
Caster, Cart, Gray

Caster, Cart, Gray

• Hard wheel caster, designed for all carts
• Gray
• Smooth rolling, dual wheel
• Caster 2" diameter, pin 7/16" diameter x 1" long
• Non-marking

PN 4568
Holder, Standard, Molded, Gray

Holder, Standard, Molded, Gray

• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5998
Stem w/O-Rings for Auto HP Holder Valve, Normally Open

Stem w/O-Rings for Auto HP Holder Valve, Normally Open

PN 8335
Holder, 4-Position, Holds 2 HVE's by Base

Holder, 4-Position, Holds 2 HVE's by Base

• Holds 2 HVE's by Base
• Mounts on 1/2" O.D. pin
• Mounting screw included
• 4-position holder for syringe and vacuum valves