PN 8114
Power Switch, 125 Vac 15 Amp, to fit A-dec( R ) 6300, Pelton & Crane LF I & LF II

Pelton & Crane® LF I Switch

• Pelton & Crane® LF I Switch, (P&C #007096 & 3321853)
• Power Switch

• SPST switch
• 125 Volt AC / 15 amp
• 6" leads
• Used by A-dec® and P&C

PN 7133
Water Relay Combo Valve Repair Kit

Water Relay & Flow Control Combo Valves, Old Style, Repair kit for 7130 Valve

• Old Style, Repair kit for 7130 Valve
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 4566
Holder, Standard, Molded, White

Asepsis Holders

• Holder, Standard, Molded, White
• Asepsis Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8222
Non-Slip Pad, 6" x 11.5"

Tray

• Non-Slip Pad, 6" x 11.5"
• Non Skid Pad

PN 9188
Single Shut Off Valve Assembly & Filter, Water

Water Single Shut-Off Valve Assembly & Filter

• Water Single Shut-Off Valve Assembly & Filter
• For water
• 3/8" compression tube connection
• Includes 40 micron filter 

PN 7220
Norgren Regulator Only, Non-Relieving

Norgren Regulator Only, Non-Relieving

• Regulator (7220)
• For use with air or water
• In-line filter (7250)
• Round gauge (7260)
• Mounting bracket (7223)
• 1/4" poly x 1/8" MPT connector (0053)
• 1/8" MPT close nipple (0094)
• For use w/ air or water
• Maximum 125 PSI
• Turn clockwise to increase pressure

PN 7090
Shuttle Valve, 1/8"

Shuttle Valve, 1/8"

• For routing two different flows through one output
• For 1/8" tubing

PN 2946
Caster, Soft Wheel For Hard Floors, Gray

Cart & Stool Casters  

• Soft wheel for hard floor caster, Gray

• Replacement for most dental stools
• Smooth rolling on tile and hardwood floors

PN 7270
Rectangular Air Gauge

Replacement A-dec® Rectangular Pressure Gauge 0-60 PSI (A-dec® #026.083.01)

• 0-60 PSI reading
• For air only
• 1/2" H x 1-3/4" W
• Vibration & shock resistant

PN 7247
Filter Element, 40 Micron

Filter Element, 40 Micron

• (A-dec® #24.0234.00)
• Non-relieving regulator, piston type
• 150 PSI maximum for regulator
• 40 micron filter element
• Turn clockwise to increase pressure
• PN 7311 rebuild kit for PN 7212
• Integrated 3/8" compression tube to adapt to 7100 & 7099 manual shut-off valve
• PN 7212 includes 10-32 x 1/8" barb & washer

PN 719
Vacuum Tubing, 1-3/4" I.D., Corrugated Sterling

Vacuum Tubing, 1-3/4" I.D., Corrugated Sterling

• Priced per foot

PN 5970
Holder Assy, Vacuum, Gray

Universal Holder

• Holder Assy, Vacuum, Gray
• HVE Holder
• Holds vacuum valves from base
• For 1/2" bar-mounting

• Adjustable tilt angle

PN 7248
Filter Element, 40 Micron; Pkg of 6

Filter Element, 40 Micron

• 1/8" FPT ports
• 40 micron replaceable element
• Kit Includes: housing, O-Rings, 40 micron filter element
• Package of 6

PN 0100
1/8" MPT Adapters x 3/8" Compression Tube

1/8" MPT Adapters x 3/8" Compression Tube

PN 4421
Automatic HP Tri-Block

Tri-Block w/ Std. Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"

PN 5811
Vacuum Canister 1/2" Plug HVE Port

Vacuum Canister, Bracket Mounted

• 1/2" Plug for HVE Port
• Used w/ central vacuum system
• Solids collector w/ removable screen
• Accepts 2 HVE & 1 SE
• Hydrocolloid drain provision
• 1/2" O.D. drain
• Uses 1 7/8" screens 5818, 5820, 5832

PN 3450
Syringe, Euro-Style, Quick Clean, Less Tubing & Kit

Quick-Clean® Euro-Style Syringe

• Smooth contours for quick, thorough cleaning and a sleek, contemporary look
• Quick-Change tip disconnect
• Precise control of air, water and spray
• Uses standard autoclavable tips or disposable tips

PN 7321
HP Muffler and Oil Collector

HP Muffler and Oil Collector

• Can be mounted through frame for removal from outside control head
• Will handle up to four handpieces
• Minimum back pressure
• Compact size to fit inside control head
• Filter media is standard cotton swab material

PN 2203
O-Ring, Buna-n, .114 I.D. X .070 Width, -006; Pkg of 12

O-Ring 11-006, Buna-n, .114 I.D. X .070 Width,

• Material - Buna-n
• I.D. x Cross Section - .114 x .070
• Package of 12
• (A-dec® #030.006.02)

PN 5851
Cuspidor Drain Kit

Vacuum Drain Assembly Kit

• Cuspidor Drain Kit
• Select cuspidor drain kit
• Eliminates the need for conventional plumbing
• Allows installation where a gravity drain is not available or practical
• Includes flush toggle for remote operation

PN 0012
3/8" Poly Q.D. w/ Shut-off, Male

Poly Male Insert Q.D. w/ Shut-off

• 3/8" Q.D. w/ shut-off
• For use w/ water or air

PN 2734
Pelton & Crane LF II Track Ceiling Mount Assy

Pelton & Crane LF II Track Ceiling Mount Assy t (P&C #1532907)

• Replaces all Pelton & Crane Ceiling and Track light arm springs
• Innovative durable brake block design
  • Machined Delrin improves glide force & maintains tension
  • New steel pins hold brake block in place
  • Heavy duty steel stops
• Hardware & instructions included

PN 0083
1/8" Barb Tee, Plastic; Pkg of 10

1/8" Barb Tee White Plastic

• For use with 1/4" O.D. tubing
• Package of 10

PN 7803
Toggle Cartridge Valve, On/Off, 3-Way, Normally Closed, Gray

Toggle Cartridge Valve, On/Off, 3-Way, Normally Closed, Gray

• 3-Way, On-Off, N.C.
• Blue cartridge body color
• Removable cartridge insert
• Will replace most OEM valves
• Color coded cartridge for easy identification
• Increased flow
• Quick and simple 60 degree turn to remove or insert

PN 5755
Saliva Ejector Basket, Plastic; Pkg of 10

Saliva Ejector Basket

• Disposable Basket, Plastic (pkg of 10)

PN 7260
Round Pressure Gauge, 0-160 PSI

Pressure Gauge 1 1/2" Face

• Rear Mounted Pressure Gauge
• 0-160 PSI pressure reading
• For air or water
• 1 1/2" diameter
• 1/8" MPT thread / 10-32 Female

PN 5168
Standard Autoclavable Vacuum Valves Lever & Spool Assembly

Premium Autoclavable Vacuum Valves Lever & Spool Assembly

• Single piece anodized aluminum body
• Easy removal lever & spool valve assembly
• Quick disconnect – 360° swivel
• Includes brush for cleaning
• Replacement Lever & Spool Valve Assembly

PN 2253
O-Ring, Viton, .447 I.D. X .052 Width; Pkg of 12

O-Ring, Viton, .447 I.D. X .052 Width

• Material - Viton
• I.D. x Cross Section - .447 x .052
• Package of 12

PN 2212
O-Ring, Buna-n, .180 I.D. X .040 Width; Pkg of 12

O-Ring, Buna-n, .180 I.D. X .040 Width

• Material - Buna-n
• I.D. x Cross Section - .180 x .040
• Package of 12

PN 6410
Foot Control, Wet/Dry w/Signal Relay, Gray Tubing

Foot Control, Wet/Dry w/Signal Relay, Gray Tubing

• Foot Control w/ Signal Relay
• Responsive, high volume, variable flow
• Toggle for water coolant on/off
• 7' polyurethane 3-hole tubing

PN 8621
Tubing Stripper

Tubing Stripper

PN 9002
Pilot Valve Diaphragm, to fit A-dec( R ); Pkg of 10

Pilot Valve Diaphragm (1” square), to fit A-dec®; Pkg of 10 (A-dec® #22.0440.02)

• Used in coolant air & water valves, Auto Pac, air operated shutoff valves, black (water) & white (air) regulator valves. 
• Package of 10
• Kit Includes: stem, spring, diaphragm

PN 9093
Service Kit, to fit A-dec( R ) Water Valve, Black Body

Service Kit, to fit A-dec® Water Valve, Black BodyIncludes the following: Black Body 24.0355.00 9094 Plastic Piston Assy. 24.0132.00 9106 Conical Spring 013.032.00 9095 Gasket 9-Hole 24.0137.00 9004 Diaphragm 22.0440.00 9002 A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5989
Holder Valve, Auto HP, Normally Open, Rear Port

Holder Valve, Auto HP, Normally Open, Rear Port

• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 7100
Manual Shut-Off Valve, 1/2" FPT Inlet

Manual Shut-Off Valve, 1/2" FPT Inlet

• 1/2" nominal compression (7099)
• 1/2" FPT inlet (7100
• 3/8" O.D. tube compression fitting outlet

PN 5169
Standard Autoclavable Saliva Ejector Lever & Spool Assembly

Premium Autoclavable Saliva Ejector Lever & Spool Assembly

• Single piece anodized aluminum body
• Easy removal lever & spool valve assembly
• Quick disconnect – 360° swivel
• Includes brush for cleaning
• Replacement Lever & Spool Valve Assembly

PN 5888
Vacuum Canister Cap w/O-ring, Bottom & Side Mounted, Gray

Vacuum Canister, Bottom & Side Mount

• Replacement Cap (w/ O-Ring)
• Available in either side or bottom port
• Solids collector w/ removable screen
• Accepts 2 HVE & 1 SE
• Uses 2 1/8" screens 5817, 5889, 5887
• Mounts using four 6-32 screws on bottom surface (included)
• 5872 & 5873 include mounting bracket 5877
• 5/8" O.D. Drain

PN 0076
1/8" Barb x 10-32 Female x 1/8" Barb Tee; Pkg of 5

1/8" Barb x 10-32 Port (pkg of 5)

PN 8600
Pelton & Crane Light Shield, LF I

Pelton & Crane® LF I Lens Shield

• (P&C #006777)

PN 0089
1/8" Uni-Clamp, 2-Piece; Pkg of 10

1/8" Uni-Clamp, 2-Piece

• For use with 1/8" O.D. tubing
• Package of 10

PN 349
FC Tubing, 3 Hole, Poly Sterling

FC Tubing, 3 Hole, Poly Sterling

• Polyurethane
• Straight (priced per foot)

PN 9187
Single Shut Off Valve Assembly & Filter, Air

Single Air-Shut Off Valve Assembly 

• For air 
• 3/8" compression tube connection
• Includes 40 micron filter 

PN 9004
9 Hole Gasket, to fit A-dec ( R ); Pkg of 10

9 Hole Gasket, to fit A-dec® (A-dec® #24.0137.01) (Pkg of 10)

• Fits black (water) & white (air) regulator assemblies
• Package of 10

PN 2103
Pelton & Crane Door Seal, Delta, Delta XL,Validator, 10"

Pelton & Crane® Style Door Seals & GasketsDoor Seal & Dam for 10" Delta / Delta XL / Validator(Pelton & Crane #1539407)

• Meets original manufacturer's specifications

PN 7156
Toggle Valve, Side Port, 3-Way, Gray

Toggle Valve, Side Port, 3-Way, On/Off, Gray

• Port barbs for 1/8" O.D. tubing
• Round body
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only
• (A-dec® #33.0048.04)

PN 0168
Duck Bill Barb

Duck Bill Barb

• Provides handpiece water line suck back control
• High flow rate is 80% of standard barb
• Barb has obvious appearance difference from standard
• Will fit any port where standard barb now used
• Can be used on handpiece or syringe water lines

PN 7022
Flow Restrictor

Flow Restrictor

• Variable control for air and water
• For 1/8" O.D. or 1/4" O.D. tubing

PN 7903
Toggle Valve Replacement Cartridge, On/Off, 3-Way, Normally Closed, Blue w/ Gray Toggle

Toggle Valve Replacement Cartridge, On/Off, 3-Way, Normally Closed, Blue w/ Gray Toggle

• Replacement for Cartridge Valve 7803
• 3-Way, On-Off, N.C.
• Blue body color
• Color coded cartridge for easy identification
• Increased flow
• Quick and simple 60 degree turn to remove or insert

PN 7069
Knob Only, Needle Valve, Gray

Knob Only, Needle Valve, Gray

• Flow Control Valve - "Hex Body"
• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread w/ nut
• Variable restriction for air & water
• Pinch valve
• Accommodates 1/8" or 1/4" O.D. tubing

PN 2205
O-Ring, Buna-n, .176 I.D. X .070 Width, -008; Pkg of 12

O-Ring, Buna-n, .176 I.D. X .070 Width, -008

• Material - Buna-n
• I.D. x Cross Section - .176 x .070
• Package of 12

PN 8700
Pelton & Crane Light Reflector Bushing, LF II; Pkg of 2

Pelton & Crane® LF II Reflector Pivot Bushing, (P&C #023940)

• Package of 2
• For use on LF II Yoke & Frame Assembly
• Replaces existing worn bushings
• Slot for 5/8" wrench
• New high temperature material

PN 5621
Valve Cleaning SE Brush; Pkg of 5

Valve Cleaning Brush

• SE Brush (pkg of 5)
• 3" bristles

PN 4568
Holder, Standard, Molded, Gray

Standard Asepsis Holder, Gray

• Holder, Standard, Molded, Gray
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle
• Air operated actuator control

PN 5810
Vacuum Canister Kit Black

Vacuum Canister, Bracket Mounted

• Kit, Includes Vacuum Canister & Both Brackets
• Used with central vacuum system
• Solids collector with removable screen
• Accepts 2 HVE and 1 SE
• Hydrocolloid drain provision
• 1/2" O.D. drain
• Uses 1-7/8" screen 5818
• Uses 1-7/8" screen 5820
• Uses 1-7/8" screen 5832

PN 6322
Foot Control, Wet/Dry, Sterling Tubing

Foot Control, Wet/Dry, Sterling Tubing

• Foot Control w/o Signal Relay
• Responsive, high volume, variable flow
• Toggle for water coolant on/off
• 7' polyurethane 3-hole tubing

PN 8010
Caster, Cart, Gray

Cart & Stool Casters

• Hard wheel for carpet, Gray

PN 7089
Air Electric Switch, 10 PSI, Normally Closed

Air Electric Switch, 10 PSI, Normally Closed (A-dec® #044.159.00) 

• Activated at 10 PSI or 25 PSI
• On/off control of up to 120V, 5 amp
• 15/32-32 thread with nut
• 125 PSI max

PN 5620
Valve Cleaning HVE Brush; Pkg of 5

Valve Cleaning Brush

• Package of 5 
• 3 3/4" bristles

PN 8410
Storage Tub, Includes Hinge, Dividers, & Lid

Plastic Tub for Trays & Carts, Storage Well w/ Organizers

• Storage Tub, Includes Hinge, Dividers, & Lid
• Mounting surface is 4" x 22"
• (A-dec® #16.0562.00)

PN 7054
Side Port Needle Valve

Side Port Needle Valve, Fine Adjustment

• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread with nut
• Includes 1/16" hex allen wrench

PN 0084
Kit 8-32 x 1/16" Barb/Washer (Pkg of 10)

8-32 x 1/16” Barb (pkg of 10)

• Used on most manufacturers’ syringes
• PN 0084 includes washer

PN 7265
Round Pressure Gauge, Panel Mount, 0-100 PSI

Pressure Gauge 1 1/2" Face

• Panel Mount Pressure Gauge
• 0-100 PSI pressure reading
• Panel-mount bracket requires 1 5/8" hole
• 10-32 I.D. thread rear, 1/8" MPT thread
• 1 3/4" diameter
• For air or water

PN 5866
Vacuum Canister Cap w/O-ring, Bracket Mounted, Gray

Vacuum Canister, Bracket Mounted

• Replacement Cap (w/ O-Ring)
• Used w/ central vacuum system
• Solids collector w/ removable screen
• Accepts 2 HVE & 1 SE
• Hydrocolloid drain provision
• 1/2" O.D. drain
• Uses 1 7/8" screens 5818, 5820, 5832

PN 4102
DCI II Manual Unit

DCI II manual control for 2 handpiece, 1 Wet & 1 Dry

• Can mount on 2" Post
• Precision Comfort® Syringe
• 6 ft. 1/2" Umbilical
• 4-Hole Straight Gray Tubing is Standard, with other tubing styles and colors available upon request
• Dimensions: 6" x 4 1/4" x 2 1/4"

PN 4425
Automatic HP Quad-Block

HP Quad-Block w/Std. Adjustment Screws

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"

PN 5312

Cuspidor Screen, to fit A-dec ( R )

Cuspidor Bowls

• Cuspidor Screen
• Fits most manufacturer’s cuspidor bowls
• Stem 2 1/2" O.D. x 1 1/2" I.D.

PN 2953
Doctor's Stool Cylinder

Stool Cylinder

• Doctor Stool Cylinder, 50mm Dia. (P&C #047038, Marus #30510) $108.70
• 17” Fully Extended, 5.5” Travel
• For use on Pelton & Crane Model 2003 & Marus Models DC5140 & DC5040

PN 5082
Vacuum Valves 1/2" Quick Disconnect Swivel

Economy Autoclavable Valves

• Replacement Quick-Disconnect Swivel for 1/2" Tubing
• Anodized aluminum body
• Quick disconnect – 360° swivel
• Smooth plastic lever action
• Includes brush for cleaning

PN 0062
10-32 Coupler, Male; Pkg of 5

10-32 Male Coupler “Hex Nipple”

• Package of 5

PN 9572
Pelton & Crane Front Knuckle Support

Pelton & Crane® LF II Front Knuckle (P&C #4191222)

• Machined Aluminum
• Includes: Front knuckle support, 2 screws, pivot pin and installed bushing

PN 9584
Pelton & Crane LF II Rear Knuckle Support Assy

Pelton & Crane® LF II Rear Knuckle Support (P&C #015806)

• Machined Aluminum
• Includes: rear knuckle support, 2 screws, pivot pin and installed bushing

PN 5817
Solids Collector Disposable Screen, 2 1/8"; Pkg of 100

Solids Collector Screen

• Disposable screen
• 2-1/8" diameter
• For use with 5872 & 5873 vacuum canister
• Blue
• Package of 100

PN 0952
1/16" Cross Connector, Metal

1/8" Cross Metal

• For use with 1/8" O.D. tubing
• Nickel plated

PN 8697
Pelton & Crane Gas Spring Adjusting Tool

Pelton & Crane® Gas Spring Adjusting Tool

• Gas Spring Adjusting Tool,(OEM #016749)

• For adjusting LF II light arm cyclinder
• 5/16" Hex

PN 2733
Pelton & Crane LF II Unit Mount Light Spring Assy

Pelton & Crane LF II Unit Mount Light Spring Assy (P&C #9439738)

• Replaces all Pelton & Crane unit light arm springs
• Innovative durable brake block design
  • Machined Delrin improves glide force & maintains tension
  • New steel pins hold brake block in place
  • Heavy duty steel stops
• Hardware & instructions included

PN 2207
O-Ring, Buna-n, .426 I.D. X .070 Width, -013; Pkg of 12

Body O-Ring, Buna-n, .426 I.D. X .070 Width, -013

• Material - Buna-n
• I.D. x Cross Section - .426 x .070
• Package of 12

PN 2964
Doctor Stool Cylinder, 45mm Dia.

Stool Cylinder

• Doctor Stool Cylinder, 45mm Dia. (A-dec® #65.0227.00, P&C # 041789, Marus 75R088)
• 17” Fully Extended, 5.5” Travel

PN 7056
Flow Control Valve w/Knob, Gray

Flow Control Valve w/Knob, Gray

• Pinch Valve
• Variable restriction for air and water
• Accommodates 1/8" or 1/4" O.D. tubing

PN 2111
Pelton & Crane Fill/Vent Water Filter

Pelton & Crane Fill/Vent Water Filter(Pelton & Crane #004326 & #1881031)

• For use with Pelton & Crane models:

• Sentry
• OMC
• OCR
• Validator 8 & 10
• Delta 8 & 10
• Delta XL 8 & 10
• 120 to 150 micron