PN 3021
Syringe Flow Control Block

Syringe Block

• For use on DCI 4102 & other manual handpiece control systems
• Includes all barb fittings
• Handpiece pressure adjustment

PN 4421
Automatic HP Tri-Block

Tri-Block w/ Std. Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"

PN 4438
Automatic HP Quad Block w/Long Adjustment Screws

HP Quad Block w/Long Adjustment Screws

• Used on DCI Edge Series 4/5 Delivery Systems
• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Twin-Block dimensions, 1 1/2" x 1 1/2" x 1"
• Tri-Block dimensions, 2 3/8" x 1 1/2" x 1"
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"
• Quin-Block dimensions, 3 3/4" x 1 1/2" x 1"

PN 4425
Automatic HP Quad-Block

HP Quad-Block w/Std. Adjustment Screws

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"

PN 4435
TRI-BLOCK AUTO W/LONG ADJUSTMENT SCREW

Tri-Block w/ Long Adjustment Screws

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Twin-Block dimensions, 1 1/2" x 1 1/2" x 1"
• Tri-Block dimensions, 2 3/8" x 1 1/2" x 1"
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"
• Quin-Block dimensions, 3 3/4" x 1 1/2" x 1"

PN 2110
Flow Adjusting Screw w/O-Ring

Flow Adjusting Screw

• For use on DCI 4102 & other manual handpiece control systems
• Includes all barb fittings
• Handpiece pressure adjustment

PN 4427
Automatic HP Quin-Block

Quin-Block w/ Std. Adjustment Screws

• Works with normally automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Individual drive air adjustment screws
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quin-Block dimensions: 3 3/4" x 1 1/2" x 1"

PN 4093
Manual HP Control Block

Manual HP Control Block

• Allen adjusting screws for air & water
• Mounting hardware
• 10-32 Barbs for 1/8" and 1/4" O.D. tubing

PN 4382
HP Twin-Block w/ Standard Adjustment Screws

HP Twin-Block w/ Standard Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Block dimensions: 1 1/2" x 1 1/2" x 1"

PN 4380
HP Twin-Block w/ Long Adjustment Screws

HP Twin-Block w/ Long Adjustment Screws

• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Block dimensions, 1 1/2" x 1 1/2" x 1"

PN 4432
HP Block Drive Air Adjusting Screw

HP Drive Air Adjusting Screw

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water

PN 4428
Automatic HP Quad-Block, Series 5

Quad-Block, Series 5, Knurled Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"

PN 4426
HP Tri-block Mounting Bracket

Mounting Bracket

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water