All Replacement Parts by Beaverstate Dental in Regulators, Filters and Valves

35 Result Found

Results per page:  16 | 24 | 48 | ALL | 
  • PN 5948
    Holder Valve, Auto HP, Normally Closed, Side Port

    Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

    • Normally closed is used for 5940, 5960 and 4592 handpiece holders

    Price:

  • PN 7052
    Needle Valve w/Knob, Gray

    Needle Valve W/Knob, Gray

    • Fine flow control adjustment for air or water
    • Panel-mounting 15/32-32 thread with nut
    • Includes 1/16" hex allen wrench

      Price:

    • PN 7001
      Toggle Routing Valve, 2-Way, Gray

      Toggle Routing “Selector” Valve Hex Body, 2-Way, Gray

      • Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
      • Panel-mounting 15/32-32 thread with nut
      • For air or water

      Price:

    • PN 7016
      Toggle Valve, On/Off, 3-Way, Gray

      Toggle Valve Hex Body, On/Off, 3-Way, Gray

      • Positive on/off control
      • Panel-mounting 15/32-32 thread with nut
      • 3-way for air only; 3-way for air only

      Price:

    • PN 7203
      Mini Regulator, 10-32 Input, Non-Relieving

      Mini Regulator

      • 10-32 Input, Non-Relieving
      • 150 PSI maximum
      • Piston type
      • Non-relieving
      • Mounting hardware 15/32-32 thread with nut
      • Water or air
      • Turn clockwise to increase pressure

      Price:

    • PN 7080
      Air Electric Switch, 25 PSI, Normally Open

      Air Electric Switch, 25 PSI, Normally Open (A-dec® #044.181.00) 

      • Activated at 25 PSI, 5 A
      • On/off control of up to 120V, 5 amp
      • 15/32-32 thread with nut
      • 125 PSI max
        Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

      Price:

    • PN 5947
      Holder Valve, Auto HP, Normally Open, Side Port

      Holder Valve, Auto HP, Normally Open, Side Port

      • Normally open is used for positive air signal
      • 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
      • 5983 normally closed is used for 4561
      • 5947 normally open is used for positive air signal

      Price:

    • PN 7250
      In-Line Filter, 1/8" FPT

      In-Line Filter, 1/8" FPT

      • 35 micron filtration
      • 1" diameter by 1" long
      • Air or water

      Price:

    • PN 7070
      Air Pilot Valve, 2-Way, Normally Closed

      Air Pilot Valve, 2-Way, Normally Closed

      • For air and water
      • Barb fitting for 1/8 O.D. tubing
      • Air actuated on/off control
      • Panel-mount 15/32-32 thread with nut
      • Requires 25 PSI

      Price:

    • PN 3021
      Syringe Flow Control Block

      Syringe Block

      • For use on DCI 4102 & other manual handpiece control systems
      • Includes all barb fittings
      • Handpiece pressure adjustment

      Price:

    • PN 7012
      Toggle Valve, On/Off, 2-Way, Gray

      Toggle Valve On/Off Hex Body, 2-Way, Gray

      • Positive on/off control
      • Panel-mounting 15/32-32 thread with nut
      • 2-way for air or water; 3-way for air only

      Price:

    • PN 7285
      Air On/Off Indicator, Green

      Replacement A-dec® Pneumatic Indicator, Green Panel Mount On / Off Indicator(A-dec® #24.0100.03)

      • 10-32 Port with barbs for 1/8" and 1/16" I.D. tubing
      • 25-120 PSI
      • Panel-mount

      Price:

    • PN 7078
      Valve Mounting Bracket, Single

      Valve Mounting Bracket, Single

      • 1/2" I.D. mounting holes
      • White powder coat finish
      • Mounts toggles, indicators, Q.D.'s and air electric switches
      • Single Mount, L: 1 1/2" H: 7/8" W: 3/4"

      Price:

    • PN 7090
      Shuttle Valve, 1/8"

      Shuttle Valve, 1/8"

      • For routing two different flows through one output
      • For 1/8" tubing

      Price:

    • PN 4421
      Automatic HP Tri-Block

      Tri-Block w/ Std. Adjustment Screws

      • Works with normally closed automatic handpiece holders
      • Consistent flow control for handpiece pressure adjustments
      • Higher output due to improved airflow
      • Longer lasting diaphragm
      • No internal cross-over of air or water
      • Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"

      Price:

    Results per page:  16 | 24 | 48 | ALL |