PN 7140
Check Valve w/Ball, 1/16" Barb

Check Valve w/Ball 1/16" Barb

• For use with non water retraction
• 1/16" barbs or 1/8" barbs
• Allows flow in 1 direction only

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 7052
Needle Valve w/Knob, Gray

Needle Valve W/Knob, Gray

• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread with nut
• Includes 1/16" hex allen wrench

PN 7001
Toggle Routing Valve, 2-Way, Gray

Toggle Routing “Selector” Valve Hex Body, 2-Way, Gray

• Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
• Panel-mounting 15/32-32 thread with nut
• For air or water

PN 7203
Mini Regulator, 10-32 Input, Non-Relieving

Mini Regulator

• 10-32 Input, Non-Relieving
• 150 PSI maximum
• Piston type
• Non-relieving
• Mounting hardware 15/32-32 thread with nut
• Water or air
• Turn clockwise to increase pressure

PN 7016
Toggle Valve, On/Off, 3-Way, Gray

Toggle Valve Hex Body, On/Off, 3-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 7068
Water Relay, Non-Retracting

Water Relay & Flow Control Combo Valves, non-retracting

• Water Relay, non-retracting
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 5947
Holder Valve, Auto HP, Normally Open, Side Port

Holder Valve, Auto HP, Normally Open, Side Port

• Normally open is used for positive air signal
• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 7212
Integrated Master Shut-Off Valve w/Regulator & Filter

Integrated Master Shut-Off Valve w/Regulator & FilterIntegrated Shut-Off Valve

• Non-relieving regulator, piston type
• 150 PSI maximum for regulator
• 40 micron filter element
• Turn clockwise to increase pressure
• PN 7311 rebuild kit for PN 7212
• Integrated 3/8" compression tube to adapt to 7100 & 7099 manual shut-off valve
• PN 7212 includes 10-32 x 1/8" barb & washer

PN 7084
Air Electric Switch, 10 PSI, Normally Open

Air Electric Switch, 10 PSI, Normally Open, to fit A-dec® Handpiece Control (A-dec® #044.158.00) 

• Activated at 10 PSI or 25 PSI
• On/off control of up to 120Volt, 1 amp
• 125 PSI max
• Normally open or closed
• 0-60 PSI reading
• 1/2" H x 1 3/4" W
• For air only
• Vibration & shock resistant

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 7070
Air Pilot Valve, 2-Way, Normally Closed

Air Pilot Valve, 2-Way, Normally Closed

• For air and water
• Barb fitting for 1/8 O.D. tubing
• Air actuated on/off control
• Panel-mount 15/32-32 thread with nut
• Requires 25 PSI

PN 3021
Syringe Flow Control Block

Syringe Block

• For use on DCI 4102 & other manual handpiece control systems
• Includes all barb fittings
• Handpiece pressure adjustment

PN 7285
Air On/Off Indicator, Green

Replacement A-dec® Pneumatic Indicator, Green Panel Mount On / Off Indicator(A-dec® #24.0100.03)

• 10-32 Port with barbs for 1/8" and 1/16" I.D. tubing
• 25-120 PSI
• Panel-mount

PN 7250
In-Line Filter, 1/8" FPT

In-Line Filter, 1/8" FPT

• 35 micron filtration
• 1" diameter by 1" long
• Air or water

PN 7012
Toggle Valve, On/Off, 2-Way, Gray

Toggle Valve On/Off Hex Body, 2-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only