PN 7140
Check Valve w/Ball, 1/16" Barb

Check Valve w/Ball 1/16"

• For use with non water retraction
• 1/16" barbs
• Allows flow in 1 direction only

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Valve, Auto HP, Normally Closed, Side Port

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 0168
Duck Bill Barb

Duck Bill Barb

• Provides handpiece water line suck back control
• High flow rate is 80% of standard barb
• Barb has obvious appearance difference from standard
• Will fit any port where standard barb now used
• Can be used on handpiece or syringe water lines

PN 7052
Needle Valve w/Knob, Gray

Needle Valve W/Knob, Gray

• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread with nut

PN 7001
Toggle Routing Valve, 2-Way, Gray

Toggle Routing Valve, 2-Way, Gray

• Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
• Panel-mounting 15/32-32 thread with nut
• For air or water

PN 7016
Toggle Valve, On/Off, 3-Way, Gray

Toggle Valve, On/Off, 3-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only

PN 4430
HP Tri-Block Diaphragm

HP Tri-Block Diaphragm

PN 7080
Air Electric Switch, 25 PSI, Normally Open

Air Electric Switch, 25 PSI, Normally Open (A-dec® #044.181.00) 

• Activated at 25 PSI
• On/off control of up to 120V, 5 amp
• 15/32-32 thread with nut
• 125 PSI max

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 7321
HP Muffler and Oil Collector

HP Muffler and Oil Collector

• Can be mounted through frame for removal from outside control head
• Will handle up to four handpieces
• Minimum back pressure
• Compact size to fit inside control head
• Filter media is standard cotton swab material

PN 7133
Water Relay Combo Valve Repair Kit

Water Relay Combo Valve Repair Kit

PN 7212
Integrated Master Shut-Off Valve w/Regulator & Filter

Integrated Master Shut-Off Valve w/Regulator & Filter

• Non-relieving regulator, piston type
• 150 PSI maximum for regulator
• 40 micron filter element
• Diaphragm style master shut-off valve
• Integrated 3/8" compression tube to adapt to 7100 and 7099 manual shut-off valve

PN 7070
Air Pilot Valve, 2-Way, Normally Closed

Air Pilot Valve, 2-Way, Normally Closed

• For air and water
• Barb fitting for 1/8 O.D. tubing
• Air actuated on/off control
• Panel-mount 15/32-32 thread with nut
• Requires 25 PSI

PN 7250
In-Line Filter, 1/8" FPT

In-Line Filter, 1/8" FPT

• 35 micron filtration
• 1" diameter by 1" long
• Disassembles for cleaning

PN 5983
Holder Valve, Auto HP, Normally Closed, Rear Port

Holder Valve, Auto HP, Normally Closed, Rear Port

• 5983 normally closed and is used for 4561

PN 4421
Automatic HP Tri-Block

Automatic HP Tri-Block

• Consistent flow control for handpiece pressure adjustments
• Individual drive air adjustment screws
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Block dimensions: 2 3/8" x 1 1/2" x 1"