PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 4561
Holder, Auto HP, Molded, Normally Closed, White

Asepsis Holders

• Holder, Auto HP, Molded, Normally Closed, White
• Normally Closed
• Air operated actuator control.
• Resists chemical discoloration.
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5960
Holder, Auto HP, w/Lockout Toggle, Gray

Universal Holders

• Holder, Auto HP, w/Lockout Toggle, Gray
• With Lockout Toggle
• Easy clean sytle
• Air operated actuator control
• Normally closed
• Durable plastic holder aqnd machined aluminum-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 8013
Tray, Stainless Steel, 9-3/4" x 13-1/2"

Stainless Steel Tray (B Size)

• Stainless Steel Tray (B Size)
• 9 3/4 X 13 1/2" (B Size)

PN 4592
Holder, Auto HP, w/o Lockout Toggle, Gray

Universal Holders

• Holder, Auto HP,  w/o Lockout Toggle, Gray
• Without Lockout Toggle
• Easy clean style
• Air operated actuator control
• Normally closed
• Durable plastic holder and machined alumimun-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 5947
Holder Valve, Auto HP, Normally Open, Side Port

Holder Valve, Auto HP, Normally Open, Side Port

• Normally open is used for positive air signal
• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 4566
Holder, Standard, Molded, White

Asepsis Holders

• Holder, Standard, Molded, White
• Asepsis Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5962
Holder Replacement, Standard, Gray

Replacement Holder

• Standard Holder
• Replacement holders for bracket assemblies

PN 5970
Holder Assy, Vacuum, Gray

Universal Holder

• Holder Assy, Vacuum, Gray
• HVE Holder
• Holds vacuum valves from base
• For 1/2" bar-mounting

• Adjustable tilt angle

PN 5940
Holder, Auto HP, w/Lockout Toggle, Black

Universal Holders

• Holder, Auto HP, w/Lockout Toggle, Black
• With Lockout Toggle
• Easy clean style
• Air operated actuator control
• Normally closed
• Durable plastic holder and machined aluminum-mount
• Designed for 1/2" bar-mounting with adjustable tilt angle

PN 5945
Holder Assy, Standard, Black

Universal Holder

• Holder Assy, Standard, Black
• Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Adjustable tilt angle
• For 1/2" bar-mounting
• Used with vacuum valves with tip extension

PN 8410
Storage Tub, Includes Hinge, Dividers, & Lid

Plastic Tub for Trays & Carts, Storage Well w/ Organizers

• Storage Tub, Includes Hinge, Dividers, & Lid
• Mounting surface is 4" x 22"
• (A-dec® #16.0562.00)

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5961
Holder Replacement, Auto HP , Gray

Replacement Holders

• Automatic HP Holder
• Replacement holders for bracket assemblies
• Durable plastic construction

PN 5884
Holder Bar, 8", Gray

Holder Bar

• Holder Bar, Quad 8"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 5881
Holder Bar, 2", Gray

Holder Bar

• Holder Bar, Single 2"
• For use with 4592 and 5940 through 5970 holders
• Mounting hardware

PN 8331
Holder Bar, Swing Mount, 4 Position

Swing Mount Holder Bar

• 4-Position Holder
• Mounts to vertical or horizontal surface
• White powder coat finish
• 3- or 4-position holder for syringe & vacuum valves held by tip

PN 8413
Storage Tub Hinge

Storage Well w/ Organizers

• Replacement Hinge
• Mounting surface is 4" x 22"

PN 5918
Holder, Syringe, Gray

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For Syringes

PN 5954
Holder Bar, 8", Black

Holder Bar

• Holder Bar, Quad 8"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Black holder bars are anodized

PN 5882
Holder Bar, 4", Gray

Holder Bars

• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 8493
Chair Adapter, Belmont, LSM, Westar

Chair Adapters to fit:Chair Adapter, Belmont, LSM, Westar

• Belmont Bed 20
• Westar 2001
• Westar 5000
• LSM DC-1000
• LSM COHO 
• White powder coated finish

PN 5969
Holder, Electric Auto, Normally Closed, Gray

Electric Holders

• Normally Closed
• Holder assembly with low voltage switch for direct activation of electrical accessory
• On/off lockout toggle
• 125 Volts AC / DC 5 amps
• Automatic holder

PN 5883
Holder Bar, 6", Gray

Holder Bars

• Holder Bar, Triple 6"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 8308
Vertical Mount, 1/2" Pin, Gray

Surface Mount Brackets

• For mounting folding and telescoping arms to flat vertical surfaces
• Mounting plate 4" x 4"
• Accepts 1/2" O.D. pin
• Gray scratch resistant powder coat finish

PN 4445
Holder Bar, Under Counter Swing Mount, White

Under Counter Holder Bar

• Cabinet-Mount Holder Bar
• For use with molded asepsis holders
• White powder coat
• Bar is 10-1/2" x 3-1/2"

PN 5950
Vacuum Holder Assy, Vacuum, Black

Universal Holder

• Vacuum Holder Assy, Vacuum, Black
• HVE Holder
• Holds vacuum valves from base
• For 1/2" bar-mounting
• Adjustable tilt angle

PN 8390
Utility Shelf, Post Mount, Gray

Utility Shelf Assembly, Gray

• 2" post or H-frame mount
• Pivots on mounting bracket for easy access
• Mounting bracket included
• Mounts using 1/2" pin
• Gray powder coat
• 12" x 12" surface area

PN 4563
Holder, Electric Auto, Molded, Normally Closed, White

Electric Holders

• Normally Closed
• On/off lockout toggle, 5966-5969
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• Automatic Holder

PN 5951
Holder Bar, 2", Black

Holder Bars

• Holder Bar, Single 2"
• For use with 4592 and 5940 through 5970 holders
• Mounting hardware
• Black holder bars are anodized

PN 8343
Holder Bar, Swing Mount, 3 Position

Swing Mount Holder Bar

• 3-Position Holder
• Mounts to vertical or horizontal surface
• 3- or 4-position holder for syringe & vacuum valves held by tip

PN 5963
Holder Replacement, Vacuum, Gray

Replacement Holder

• Vacuum Holder
• Replacement holders for bracket assemblies

PN 5967
Holder, Electric Auto, Normally Open, Gray

Electric Holders

• Normally Open
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• On/off lockout toggle, 5966-5969
• Automatic holder

PN 8466
Post Clamp, Butterfly, White

Light Post Extensions

• White Butterfly Clamp For 2" Light Post 
• Kit includes light post bushing, “Butterfly" clamp, 8' extension cord & post
• 24" or 30" post length
• Scratch resistant powder coat finish

PN 5885
Holder Bar, 14", Gray

Holder Bar

• Holder Bar, 14"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 5920
Holder, Syringe, Black

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For Syringes

PN 8400
Storage Well w/Organizers

Storage Well w/Organizers

• Well w/ Organizers
• Mounting surface is 4" x 22"
• White plastic tubs with dividers and hinged cover

PN 5976
Holder, Electric Auto, Vacuum, Normally Closed, Gray

Electric Auto Holders

• HVE Normally Closed
• Holder assembly with low voltage switch for direct activation of electrical accessory
• On/off lockout toggle
• 125 Volts AC / DC 5 amps
• Automatic holder

PN 5825
Vacuum Canister 2" Post Mount w/Gray Bracket, Anodized

Vacuum Canister Post Brackets

• Gray Bracket, Anodized

• For mounting vacuum canisters 5810 & 5860 on a 2" O.D. post
• Anodized with gray bracket 

PN 8414
Storage Tub Lid

Storage Well w/ Organizers

• Mounting surface is 4" x 22"
• Lid

PN 5942
Holder Replacement, Standard, Black

Replacement Holders

• Standard holder
• Replacement holders for bracket assemblies
• Durable plastic construction

PN 5943
Holder Replacement, Vacuum, Black

Replacement Holders

• Vacuum Holder
• Replacement holders for bracket assemblies

PN 5953
Holder Bar, 6", Black

Holder Bar

• Holder Bar, Triple 6"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Black holder bars are anodized

PN 5941
Holder Replacement, Auto HP , Black

Replacement Holders

• Automatic HP Holder
• Replacement holders for bracket assemblies

PN 4562
Holder, Electric Auto, Molded, Normally Open, White

Electric Holders

• Normally Open
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• On/off lockout toggle, 5966-5969
• Automatic holder

PN 8001
Cart Frame, Standard H-Frame

H-Style Mobile Stand

• Stable "H" frame base
• Adjustable vertical height from 25" to 41"
• Satin chrome finish
• 2" diameter post with 3" x 3" mounting plate
• Twin wheel casters roll freely on carpet or hard flooring
• 20" W X 18" D

PN 5952
Holder Bar, 4", Black

Holder Bars

• Holder Bar, Dual 4"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Black holder bars are anodized

PN 8411
Storage Tub Divider, Full

Storage Well w/ Organizers

• Storage Tub Divider, Full
• Mounting surface is 4" x 22"

PN 8230
Rigid Arm, 12", Anodized

Rigid Arm, 12", Anodized

• 12" arm
• Mounts using 1/2" pin

PN 5955
Holder Bar, 14", Black

Holder Bar,

• Holder Bar, 14"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Black holder bars are anodized

PN 8431
Light Post Extension, 24", P&C Bushing, Stainless Steel

Light Post Extension, 24"

• Kit includes light post bushing, "Butterfly" clamp, 8" extension cord and post
• Scratch resistant powder coat finish
• 24" post length with P&C bushing

PN 8309
Horizontal Mount, 1/2", Gray

Surface Mount Brackets

• Horizontal mount
• For mounting folding and telescoping arms to flat horizontal surfaces
• Mounting plate 4" x 4"
• Accepts 1/2" O.D. pin
• Gray scratch resistant powder coat finish

PN 8231
Rigid Arm, 16", Anodized

Folding Rigid Arm Sections

• 16" arm
• Mounts using 1/2" pin

PN 5966
Holder, Electric Auto, Normally Open, Black

Electric Holders

• Normally Open
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• On/off lockout toggle, 5966-5969
• Automatic holder

PN 5968
Holder, Electric Auto, Normally Closed, Black

Electric Holders

• Normally Closed
• Holder assembly with low voltage switch for direct activation of electrical accessory
• On/off lockout toggle
• 125 Volts AC / DC 5 amps
• Automatic holder

PN 8432
Light Post Extension, 24", Ritter Bushing, Stainless Steel

Light Post Extension, 24"

• Kit includes light post bushing, "Butterfly" clamp, 8" extension cord and post
• Scratch resistant powder coat finish
• 24" post length with Ritter bushing